Search results

  1. S

    Taarup single chop. Taarup handy forage harvester

    Has anyone on here got a hitch/ driveline that would be for sale. I’ve got a harvester in good condition but I don’t have a drive line. It is the newer style one as seen in photo. I’m not fussed about condition. Wondering if someone has one lying around that might end up on the scrap. Would...
  2. S

    Tin sheet silage trailers!

    I’m after any old silage trailers. Condition doesn’t really matter aslong as they have silage sides. Hoping some has a few around that back of the yard that haven’t done icy for years. 3/4 ton trailers. If you have anything feel free to message me. Closer to Staffordshire the better but not too...
  3. S

    Ford 4000 brakes

    Yes of course I don’t mind. Here are some photos so far.
  4. S

    Ford 4000 brakes

    Do you mind reminding me how these brakes work? When you press the pedal does it tighten to the discs to create friction? Cheers
  5. S

    Ford 4000 brakes

    I’m after abit of advice on a ford 4000 that I am restoring. I noticed the brakes did work but the pedals were very floppy and the brakes would on work abit if you pushed down hard. I have taken them all to bits as seen on photos and I’m just wondering if the best thing to do it to just change...
  6. S

    Case mxm 190 front pto

    Hi all, I’m looking for a front pto pack for my mxm190. It’s got a zuidberg front linkage but not pto as seen on the photo. Cheers
  7. S

    McCormick xtx tractors

    Is that the manual gearbox with eight power shifts as appose to the full electric on the other photo.
  8. S

    Hesston 4600 baler

    that’s fine don’t worry I have the same opinion!!! You wouldn’t know anyone else who would have one for sale? Also what would you thing is the value of one nowadays? Cheers
  9. S

    McCormick xtx tractors

    What’s everyone’s opinions on the McCormick xtx tractors? We have always run case tractors and our Mx 110 has been one of the best tractors we have ever had. I’m looking to have another and it must have front and cab suspension so I can have 50k. I would rather had the fully electronic gearbox...
  10. S

    Hesston 4600 baler

    You wouldn’t consider selling your old one would you? Cheers
  11. S

    Hesston 4600 baler

    I’ll have a look around see if I can find one then. I did see one for sale at not bad money a few weeks ago but as I was looking at 4900s I let it go!
  12. S

    Hesston 4600 baler

    Has anyone had any experience with the Heston 4600 Baler’s. Are they good or bad. I’m only looking for something to do around 500 bales a year tops. I’ve had a look at a 4900 hesston but that’s too big for me and I prefer square bales to round ones. Anything to look out for? Cheers
  13. S

    Kuhn fc 250 mower

  14. S

    Kuhn fc 250 mower

    Cheers for the help. How many tractor engine revolutions do you mow at with yours cheers
  15. S

    Bamford s4/ super s4 chopper

    I never saw a jones one being honest. But yes they were bamford precision chops ?
  16. S

    Bamford s4/ super s4 chopper

    Has anybody still got a bamford s4 chopper? We use to find them in the 80s on the back of our Leyland’s but I haven’t seen one in ages they never seem to turn up at sales anymore. We had numerous ones and I found some photos the other day of us chopping with our 285. Has anybody got any photos...
  17. S

    Kuhn fc 250 mower

    Thankyou for the help I’ll keep all that in mind. It’s only going to be like a backup mower to my main one it’s more of a toy for the back of my ford 8200. Any idea on anybody breaking them as some of the tinwork isn’t the best so if there was somebody I’d look to purchase some. I have some good...
  18. S

    Kuhn fc 250 mower

    Thankyou for the heads up on that. How do you tell if the nylon bushes are worn? Like if there is a lot a play in them? I’m not with the mower at the minute but of the top of my head I haven’t seen any wear on the shaft so that’s a good sign.
Top