Search results

  1. RLSPlant

    Advertising boards

    Evening all, Hope we all had a good time over the festive period So I was thinking tonight about ways to draw an extra pound or three, I have an 80ft long shed which is adjacent to a walking path for dog walkers etc, does anyone rent wall space for advertising or such like, if so how much...
  2. RLSPlant

    Concrete panels

    I'm up about Glasgow
  3. RLSPlant

    Concrete panels

    90mm thick
  4. RLSPlant

    Concrete panels

    Came from CWP (robinsons), bought the same panels as my pals, he said he had lifters but they must have changed their design Been quoted £80 plus the tax mans share
  5. RLSPlant

    Concrete panels

    Hello All, Anyone know the name of the lifter I need to lift these panels, hole is 10mm approx, I ordered a pair of 2.5t clutches as they were the smallest I could see on the market but are a mile too big Cheers Robert
  6. RLSPlant

    Diesel pump leak jcb 535

    Circled where leak is coming from
  7. RLSPlant

    Diesel pump leak jcb 535

    Have a diesel leak on the side of the pump, seems to be 4 holes on the manifold body and looking at the pump the top one at 2 o clock is weeping but only at idle, anyone had this? Thanks
  8. RLSPlant

    Jcb 535 engine fuses blowing

    Hello all, So my 2002 535 produced a weird fault today, well yesterday I was working it between my place and a friends (9miles each way), now this has done this once before and a change of fuse fixed it instantly however this time I made said 9 mile journey to where I'm keeping my machine...
  9. RLSPlant

    Stone wall style

    Its into the neighbours back garden, seems to be a tree had fallen knocking the wall out, the tree has been chopped up and left, neighbour looks to have put stile in so he can trim his hedges on my side of the wall
  10. RLSPlant

    Stone wall style

    So I have this stone stile on a wall boundary from my field into a neighbour's garden, looks to have been built in recently though before I owned the field, I wish to run stock fencing along this wall, my question is I see no reason for my neighbour to enter my field other than to trim back the...
  11. RLSPlant

    Jcb 535 rear hub seal

    You weren't wrong, they were tight as......
  12. RLSPlant

    Jcb 535 rear hub seal

    Thanks, would you know the torque settings for the tapered bearings?
  13. RLSPlant

    Jcb 535 rear hub seal

    Cheers, will have an angle grinder on hand in case it doesn't move
  14. RLSPlant

    Jcb 535 rear hub seal

    Have a rear hub seal leaking on my 535, has anyone that's done one got any tips, I've done 4x4s and vans before but haven't tackled a JCB before 904/50009 & 904/M6779 are what the dealer said usually go hand in hand so that's what I bought Thanks in advance
  15. RLSPlant

    Transmission or hydraulic dip stick?

    Thanks, needs a top up then The oily shine on everything is my fault, went wild with the WD40, saves anything rusting
  16. RLSPlant

    Transmission or hydraulic dip stick?

    Thanks all, found the hydraulic one, is in the hydraulic tank cap
  17. RLSPlant

    Transmission or hydraulic dip stick?

    Hi all, Can anyone identify this dip stick, is it transmission or hydraulic level? Thanks Robert
  18. RLSPlant

    JCB Tilt ram

    Yes, I can't see the part number for the ram I have laying in the shed, if I can work out what machine it's off I have a chance of selling it on as it's no use to me I don't need to know the one off my machine as as you pointed out I got that from the website, it's the one I bought thinking it...
  19. RLSPlant

    JCB Tilt ram

    Phoned my local hydraulic repair shop, cheaper to buy new rod than chroming and machining
  20. RLSPlant

    JCB Tilt ram

    Nope mine goes to headstock too, this one I bought is 2" shorter and pin bores are smaller, just a shame I can't find a clear part number

Forum statistics

Threads
170,975
Messages
3,905,013
Members
42,724
Latest member
Vitgardiner
Top