Is the shed only being put up for use in the next few months and have no use for it afterwards?
Bet the answer is no and you probably have stock or fodder to be stored kept in the shed for next winter? Crack on if can get a build slot?
I am about to put planning in for another shed as have...
Is there anything left to grip with decent mole grips?
A small bolt like that is sometimes possible to drill into the centre of it and knock an Allen key into the hole and just unwind.
Another trick is to place a nut the same size as the broken bolt over the sheared stud and using a mig welder...
E="Forage Trader, post: 6860340, member: 473"]
Most of us have lost loves ones in life ,some under tragic circumstances , you have to brush yourself down and carry on , it can eat you up if you dont
Very little as sad as people wasting a fair chunk of their life repeatedly going over the same...
A lot of people have tattoo's but actually I haven't but the one I would happily get would be tattooed on my chest would read
"ONLY RESCUSATE IF QUALITY OF LIFE HASN'T BEEN COMPROMISED"
Who wants to hang on at the expense of the ones you love?
Neighbour is head of microbiology at local hospital and his son is awaiting to fly back from America any day. You'd think they would know better.
Personally air transport for passengers should be banned worldwide until after the last case of CV. Medical supplies should be the only allowable...
However quickly and well the Nightingale hospital has been done I personally thought it just looks like a waiting room for the morgue. I personally would think the busiest people will be those boxing up☹️
Almost think a bolt would all but pull that flat down with a big enough windy gun but the bolt would be under massive tension and probably strip the threads. In a few years time with no warranty a bit of heat would help but this tractor is still only in its first year
Formal letter to reject it? Or seek a new replacement tractor as enough is enough as either it's right or it's not?
It's an integral part of the cab and it's faulty. I am sure HSE would love the bodge with some washers and has that been tested as a cab modification and limits the surface...
Belts on conditioners need to be murder tight and no half measure's and check/ retighten after first half hour or so.
Are bearings running hot and transfering heat? Especially idler bearings.
Anything rubbing like a guard?
Tractor vastly bigger than 10hp per foot of mower? ( More like 20hp...
Red @47ppl but first delivery date for an order yesterday was 18th April
Winston's Petroleum 49ppl but delivery next week so ordered here. 2300 litres ordered.
Heard yesterday several have been buying from garage forecourts to keep them going