Search results

  1. Bloders

    ex60 electrics

    Hello again. None of the Hitachi EX60-2 "dash" gauges and throttle controls work. fuses seem ok (none are blown) Any suggestions please thank you
  2. Bloders

    MF6460 speed signal

    Hello again. Got a MF6460 T2. Can you tell me if it has a speed signal output on the multi pin plug? Thinking of buying a KRM spreader whihc needs a speed input. Thank you
  3. Bloders

    Glenfarrow fire rope

    Howdo does anyone know what size/type of fire rope is required for a Glenfarrow log boiler? thanks
  4. Bloders

    Biocell

    Hello Does anyone have any comments, positive or negative on Biocell silage additive? Any other products whihc people recommend?
  5. Bloders

    Fertiliser spreader

    Mainly, thanks to @Nick, we are thinking if changing the fertiliser spreader. Would be a 3 bag linkage mounted machine. Currently thinking of a krm machine. Any other recommendations and any idea who sells new krm machines near wrexham/oswestry Thanks
  6. Bloders

    Hitachi EX60-2 oil cooler

    Right.... it's had about 3 hydraulic oil cooler repairs. Can anyone suggest where to get a new oil cooler from for our EX60-2 please Any suggestions why is keeps going. The hydraulic cap seems to be a pressurised version so I assume the system is meant to hold some pressure in? No other...
  7. Bloders

    Ifor Williams brakes

    Hello Does anyone have any guidelines for fitting new Knott brakes to an Ifor. Fitting new cables and shoes etc, so need to adjust it all up to behave correctly. Bit disapointing to remove a drum and the friction material is seperated from the shoe :(
  8. Bloders

    Tyre repair

    I think this tyre is scrap. Does anyone think it can be repaired? And woukd it be worth it?
  9. Bloders

    hydraulic drive for small wood chipper

    we have a Timberwolf 150mm wood chipper which is driven from tarctor PTO. We owuld like it on the front links, so the obvious answer is to have a front PTO... Alternatively, we could drive it with a hydraulic pump. Any ideas on this? My reckoning is it may need a fair bit of power (say 40hp) so...
  10. Bloders

    Automatic ear tag reader

    Hello... im trying to find out if a panel mounted ear tag aerial can be connected to the Shearwell Walkabout pro handhel device? Most people seem to want to sell a box of tricks to go with the automatic ear tag reader whereas if the reader can input to the Psion device, it makes the "extra" box...
  11. Bloders

    automatic ear tag reader

    Hello... im trying to find out if a panel mounted ear tag aerial can be connected to the Shearwell Walkabout pro handhel device? Most people seem to want to sell a box of tricks to go with the automatic ear tag reader whereas if the reader can input to the Psion device, it makes the "extra" box...
  12. Bloders

    3 in 1 creep feeder

    Hello brother is asking if the 3 in 1 creep feeders (http://www.3in1feeders.co.uk/) are any good. do they work ok with nuts and small pellets? thanks
  13. Bloders

    marshall trailers

    Who is the local dealer to Wrexham/Oswestry? website doesnt offer much guidance.
  14. Bloders

    Case 4240 Brakes

    Right! A friend has a case 4240. We have bled the brakes and it works fine. However, if it is left parked up for a few weeks, the brakes no longer work and need bleeding again. I have cleaned the little header tank out, cleaned the two pipes feeding and empting the tank and the restrictor...
  15. Bloders

    Front PTO for Massey 6460

    Looking for a front PTO to go on a Tier 2 6460 with a Zuidberg front linkage
  16. Bloders

    Grammer air seat

    Got a Grammer air seat in teh fergy 6460. Its started going down sometimes. Doesnt usually go down when in the seat, usually when your off the tractor. Had a look. The air bag is worn (been replaced before) but not leaking. I think it is the control valve not seating correctly? Does anyone...
  17. Bloders

    Massey spool connectors

    Howdo, is there a repair kit i can get for the connectors as shown in the pciture or do i need to replace them? Any suggestions where to get them? One has started to leak badly, but also, a couple of times, they wont open. its happened with different implements so i assume its not the implement...
  18. Bloders

    JCB Breaker 2cx parts

    had a bit of a breakdown today :( who breaks JCBs? Specifically, im looking for the front quick hitch. Also looking for a front bucket as well. TIA
  19. Bloders

    Stock recording software

    First post in this section I think! We are considering a move away from Shearwell to FarmIT3000. Looking at the Farmit3000 kit, a drafting race with EID reader and weigh bars would be useful. However, we already have a Psion Walkabout gizzmo. FarmIT sell a "box" to read the ear tag from the...
  20. Bloders

    Rotavator blades

    Any recommendations where to get blades for a Howard rotavator.

Forum statistics

Threads
156,303
Messages
3,575,816
Members
39,590
Latest member
Gilly56
Top