Search results

  1. radu

    First week in use NEW machinery dramas??

    Two weeks old tractor, the dealer said i could have it even though the finance wasn't sorted yet and neither the insurance. Driver error... P.S. got it repaired, the finance company doesn't have a clue
  2. radu

    Early yields from Eastern Europe

    It was pretty much general, much worse in some regions where some farmers ended up direct drilling maize in their wheat fields. If anything was localized, it was the rain
  3. radu

    Early yields from Eastern Europe

    I sold 500 tons in february for 650 RON/t, thats the equivalent of 120 GB pounds now. That seemed a good price at the time, the crops were looking great and i frankly i decided to forward sale because i was worried about storage space, as we also have about 220 ha of OSR. The prices are what...
  4. radu

    Early yields from Eastern Europe

    Our target on a good year is 7.5-8 t/ha
  5. radu

    Early yields from Eastern Europe

    Just finished harvesting the wheat a few hours ago. 4.6 t/ha average on 220 ha, had a few disasterous fields with sub 1t/ha and the best fields yielded ~7t/ha. We had no rain from mid march to late may and a couple of -8 C frosts in april.
  6. radu

    Amazone ux 3200 pressure

    Also worth checking the flowmeter(s). When was the last time it worked ok? When going at 8bar, did it spray the right amount of chemicals?
  7. radu

    Amazone ux 3200 pressure

    Did you check all the filters?
  8. radu

    Amazone ux 3200 pressure

    What nozzles are you using?
  9. radu

    What can I do with weed mapping?

    in my mind, the goal of a business is to make money (and needs to have a viable business plan on the longish term). however, our personal goals should definitely not be that narrow, so i agree with you that on a personal level profit shouldn't be the top priority. The grid system is a good...
  10. radu

    What can I do with weed mapping?

    Efficiency = profit margin. Half of the ideea is very good, spraying only where it's needed. The other half is not so good, walking every field and surveying every weed could turn up to cost more than the savings from using less herbicide. An alternative way of creating the weed maps, using...
  11. radu

    What can I do with weed mapping?

    You need to apply the herbicide at a certain stage of the crop and when the weather is right. Let's suppose you apply it on D day. If you spray the whole field, you hit all the weeds that are above ground that day. If you were using a map created from data that might be from let's say D - 3...
  12. radu

    What can I do with weed mapping?

    i don't think it's feasible walking the fields to record weed locations. For once, it's very easy to miss some of them and each will turn into tens or hundreds by next year. Or there's a rain from the time you record the weeds to when you actually spray and more weeds emerge. Also it would be...
  13. radu

    Combinables Price Tracker

    And now the ban was lifted. I don't think there's a lot of grain left, not in the farmers stores anyway.
  14. radu

    Telehandler 405/70-24 tyres and 650/75R32

    Looking for a set of 4 telehandler tyres and one tyre for a combine. Sizes are mentioned in the title. I am nit from the UK, but if the price is good, i will arrange pickup.
  15. radu

    Amazone trailed sprayer issue

    It seems tha my UG3000 is underdosing. Can anybody give me a part number for the seal in the section valve?
  16. radu

    Zürn rape kit question

    So, this is where it goes and the idler that goes with it. Also, you need a different, longer knife drive belt
  17. radu

    Zürn rape kit question

    It goes on the left side of the header behind the door, there should be some idlers that go into those holes to guide the knife drive belt. I'll post some pictures of mine tomorrow
  18. radu

    I need a solution

    If you look in the background of the picture i added, you can see how the cylinders are attached. No room for welding anything on the outside of the plate
  19. radu

    I need a solution

    The pins are 30mm and the holes are 35-37. There's not a lot of metal pushed out of the hole and the difference in diameter is big so i'm thinking that it is a case of a friday afternoon build and they forgot to install the bushes because on the other side of the rams there are 2mm bushes (30mm...
  20. radu

    I need a solution

    I'm not from the UK and i don't think they have a representative in here other than the main dealer, which i doubt woud be very helpfull as i didn't get it from them

Forum statistics

Threads
180,867
Messages
4,117,850
Members
45,362
Latest member
socialmedia
Top