Search results

I’m looking for a secondhand Kramer 457/557 with under 4000hrs and in VGC. Thanks

Hi, was wondering if there is anyone on here running an Optum and what there opinions are, they seem to be relatively good value secondhand with 2000hrs on them. Main jobs would be power harrowing, mowing and tankering. TIA

Looking at wall coatings for a new parlour, previous one was done in fibreglass which looked perfect to start off with but is now starting to come away from the walls in various places. The walls are going to be built from blocks and possibly rendered although I quite liked the idea of not...

Looking for opinions on my current parlour upgrade plan, a bit of background we currently milk in a eleven rear old 32/32 Delaval herringbone parlour, Auto I’d, Auto Seg. We do a full routine regards prep and achieve good results and always have two people milking, throughput is about 100 cows...

Herdsperson required to work on large family Dairy Farm near Bruton Somerset, modern parlour with sand cubicles. The herd is grazed during the summer months and fully housed during the winter. Key responsibilities will include helping to milk the cows and being fully involved with the herds...

Hi, I'm soon going to be drilling a large amount of holes in some concrete panels for water bowls etc, was wondering is there any way to stop the drill blowing a fair lump out of the other side of the panel whilst drilling through. TIA

Im planning on building a new calf shed this winter for calves aged from birth to weaning, we calve AYR so shed would be in constant use, don't like the idea of hutches. Current idea is 120ft x 35ft x 15ft to the eaves using 1500mm panels to prevent drafts with highlight cladding above this and...

Had a load of Lorry sidewalls delivered, am a bit concerned that very few are actually trimmed round properly some even have a bit of tread on them most are cut to a point not round if that makes any sense. Was wondering what other people's are like we can trim these bits off but will take time...

approx 30 BBX and 30 AAX calves, from 3 to 6 months old for sale mid-Somerset open to sensible offers. Tel 07970 832415

All Terrain Vehicles: Honda - Yamaha Grizzly 125 Category: All Terrain Vehicles Manufacturer: Honda Price: £1200 Condition: Used Description: Yamaha Grizzly 125, very good condition, this is my sons bike, serviced 2 months ago, new chain and sprockets, the exhaust had a small hole in it so...

Bought a brand new defender 19 months ago, from the very beginning it has been unreliable with most faults resulting from an alleged split pipe/breather on top of the fuel tank. It is on its third engine been at the dealers for months at a time, anyway the dreaded orange light came on again...

I've purchased a JD7810 recently and no2 spool appears to be locked/pressured when I try and put the hydraulic pipe in, other side return pipe goes in fine any thoughts appreciated.

We have drilled another borehole as we are on limit with existing systems new borehole appears to be a good source of water except it is high in iron I think the reading was 379, legal limit for drinking water is 200. I have had a quote for a standalone system to filter out the iron in the water...

Have seen a low houred 7810 advertised with a full power shift gearbox I was wondering what people's opinions are on the gearbox ? will mainly be used for heavy transport jobs tankering on hilly roads etc. TIA

Truck cab, bull bar, light guards 53 plate, 119k Radio, 3rd seat Green, mot'd/serviced 30th August Good condition £5500+vat Tel 07970 832415 Mid somerset