Search results

Pretty sure all 50K JD come front brakes you can not get them without or atleast all of ours came with front brakes fitted as standard.

Japanese for a long time German for a fun time (until it goes wrong and then you wish you had bought Japanese ).

The summer continues with plenty of baling and chopping.

Spring drilling and planting is underway inbertween rain showers and gale force winds.

We carry 31t we can go heavier but then we get restricted on the roads we can use , the unit has to be a certain length to qualify for the heavy plates . Bit of Volvo porn in fert plant today.

Picking up a few loads of lime today .

It seems to sit very low is it on air suspension or a road only truck ?

The older i get the more i realise there truly is no limit to the level stupidty that some people can manage .

Whats the story with the bus did he try and reverse down the lane ?

Stick with a machine with a proven history , lots of people have said they can match a claas when going well but none have said they out perform a claas so at best you can only hope to match what you have now . Machines are to expensive and margins are to tight to take a chance on something...

nice simple looking drill hope it works well for you.

One of our tractors working on a ski slope needed a new battery so a quick trip to the top of a mountain.

Winter holiday time ,off in a camper again as sunny beach's are out of our price range at the moment , had quite a few -4 nights but nice and toastie in the van . started off at MT cook and then wandered around the the south of the south island for 2 weeks . A spot of jet boating and rafting on...

We used to solder joints but this is what we use now crimp connector with heat shrink best of both worlds and much quicker and easier . JD wont allow any solder joint's to be used during warranty work anymore because of wire breakage and resistance issues with modern electrics.

Krone quick release system is quite poor the last set of mowers we have bought were specd with bolt on blades and we are converting the rest of the sets to bolt on aswell , the big M seems to be better but still not 100% . krone actually sell a rattle gun just for changing knife bolts but we...

Make sure you lie down before you read the quote for a new one, when we had that tractor and krone baler on demo in the summer we had to insure it for just over million $ the tractor on its own was well over $400k.

Long weekend off so achieved something we have wanted to do for many years and went whale watching in kaikoura , was a chilly 8 degrees but successful trip 2 sperm whales and plenty of dolphins and seals.

Don't fixate on dead straight rows being effecient is more important, nothing worse than lots of short work just because the rake tractor was on gps and the driver didnt have the brains to turn off the gps and steer around a curve.

We have a 4 year old 5040 combi which has a G1 baler in it.

Electrical problems shouldnt cause a machine to be parked up long term , while they can be harder to diagnose than old school mechanical machines they are generally easy to fix once the problem is found .