Search results

I suspect mowing 3.1 metres will be another challenge in a couple of weeks! Only really need it to open up in the right spot. How do you guys do it?

Great, thank you.

Thanks, will that mean my wheelings are 12m apart and I throw the same area twice? I.e. do you throw to the previous wheeling or does one pass do the whole 24 and then you start over?

After finishing in the parlour it's back ti the manual! It's the kubota version of the vicon ROM.

Ah, ok. We've literally just had them delivered and going through things now. Previous experience was teagle xt48

Hi We've just had a second hand patchwork system to go with our first 24m spreader and I think I'm confusing myself! Spreading to 24m, we need to travel at 12m widths. So, is your working width in patchwork 12 or 24? I think I've managed to work everything out - measuring, AB etc from online...

Tbh, without the price being what it was, we wouldn't have an utv. So it would be pointless us comparing much more expensive ones - they just wouldn't be bought.

Only issue has been a door latch. No other experience of other utvs but has made winter stock checking much more enjoyable. Limited to 36mph, which is ok and grips well on the field. Corvus 600 now available which looks good, but we'd happily consider another cfmoto and probably a bike when the...

Hi After 2 12-15 month old Angus bulls ideally in Mid Wales/Shropshire border area. Easy calving, to run on dairy heifers and cows. Thanks

Got a 600 with cab etc. Apart from being a bit noisy (and i have nothing to compare it against) it's been great. Very handy to check stock across the village and was about the same price as a Honda bike. 2 yr warranty too.

It's perfectly fine for the NFU to canvass its members' opinions before formulating its response. The real problem is that the NFU and only the NFU provides the representatives to Red Tractor boards etc effectively on behalf of ALL farmers. It should have a duty to act on behalf of all farmers...

For everything else apart from the odd time drilling would you say it's powerful enough for the rest of the work? It's the one we're edging towards due to the dealer, warranty, finance and generally liked it on demo. Obviously, weather has been too poor for the muckspreading we had intended to...

About 30 mins west of Welshpool. Hughes's Oswestry - been very easy to deal with and accommodating so far.

How are they still being sold plus VAT second hand?

No, same engine through the range. Yes, I was pleasantly surprised with the quotes. I think it can run away quite quickly once you start adding things!

We've been quoted £75 000 for a basic spec with loader 6-122, but having driven the 132, wouldn't want less. Rough spec - Manual spools etc, no screen, but it has auto box functions, brake to stop, 4 speed pto, f and c suspension - so easily everything we need and a slightly better spec than the...

There's two M6s - the 001(light duty) and the 002. The 002 is 6t with 7t lift and the same engine as the M7. To be honest, it felt well built and a nice place to be. We started looking at an M7 but it's an unnecessary £20k more expensive for us and 40k plenty for 90% of our work. M6 actually...

Just a quick bump to this one in case anyone's got anything to say!

Evening, Does anyone have any experience of the Kubota M6 002 range? Looking for a loader tractor which will undertake yard loader duties, mow, spread fert, slurry, mow and cart a lot of round bales. Essentially an all rounder. Just had a 132 on demo and it's a nice enough tractor. Might just...

And that's exactly what I thought I would find when I started looking.