Search results

  1. F

    Guidance for a guidance ready MF 7720

    I’ve decided to finally bite the bullet and put guidance on my 2019 7720 which I bought as guidance ready and was wondering if anyone had any recommendations for good systems or any to avoid, looking for something good enough for spraying so fairly accurate and a bit of drilling in the autumn...
  2. F

    Algae in water troughs

    We’ve got about 30 water troughs on the mains supply on a couple blocks of ground we own and some we rent, and always have algae in the, some worse than others, and after putting in a brand new trough get algae within a month, wondering if fish would be a potential solution or if anyone has has...
  3. F

    Wi-Fi bridge v Ethernet

    Currently have Wi-Fi in the house off a landline which is slow as a funeral, and have Wi-Fi in the office running from a 4g router which is great, reliable and quick, been doing some thinking and if I could find a way to have the house Wi-Fi running off the office box would be ideal. The...
  4. F

    Venturi primers

    I’ve seen a bit of advertisement for these and was wondering if someone could enlighten me on how the whole system works and if it is an improvement over the small hydraulic driven vacuum pump on my soda l35. I’m mainly curious what people use to generate the vacuum in the first place. Thanks Frank
  5. F

    Denhay farms sale

    Did anyone go and know what the krone self propelled made, thanks Frank
  6. F

    Case led lights

    Does anyone know who makes the led work lights on new case's. Had one on demo and the lights were fab but couldn't see a name on them and would like to buy some for our loader if they're not too expensive, thanks Frank
  7. F

    Umbilical Dribble Bar

    We have been doing our own umbilical pumping for a few years with a twin nozzle splash plate type spreader and are looking to buy a 7.5 or 9 metre dribble bar. I've priced up one or 2 so far and waiting on a few more prices. They all seem about the same money so was wondering if anyone could...
  8. F

    12v solar battery charger

    I was looking to buy a 12v solar panel and battery charger for some lights in my wife's chicken shed.the plan is that the panel will charge a battery enough to be used for about an hour each evening. I have ordered 2 12 watt leds and have a fencer battery but just need some guidance on the...
  9. F

    Lely slurry sucker

    Thinking of installing automatic scrapers and was wondering while I'm getting prices if anyone knows what on offer these would cost Have heard between 20 and 25k but could anyone be specific about the cost and any reviews would be appreciated. Thanks Frank
  10. F

    Growing tall maize

    My daughter was sent a maize seed through the school and instructed to grow the tallest maize plant. It will be measured in September when they go back for next year. As a farmer I feel under pressure to show my crop growing skills (you know what its like) but we haven't grown maize for a while...
  11. F

    Hydraulic top links

    I was thinking of buying a hydraulic top link or 2 and was just wondering how long they last as our manual ones tend to last 6 or 7 years before the threads get lose and become dangerous. So I thought if a hydraulic one lasted longer it would be worth it and as far as I can see the only part...
  12. F

    Manitou 627 Horn

    A bit of a random one but doesn't anyone know where you would find the horn on a 2012 manitou mlt 627 as ours has been broken for a few years and I have found an old one that works and want to put it in but cant find the old one. I can see it in the engine bay or by the fuel tank and obviously...
  13. F

    Outdoor led lights

    I was thinking of buying some led lights for our calf hutches. It's not a massive space to light up but I'm looking for something better than a headtorch. I was thinking of 12v lights and run them off a battery as not near any electricity. Has anyone used any similar lights and know what's good...
  14. F

    Massey 6480 linkage sensor

    On my 2010 6480 I have an issue where the linkage is all over the place. If you lift the linkage up it will say it's always at say 90% but it will jolt up and down all over the place. It's the same if you put it down to work. The only way to keep it where you want it is to put the rocker switch...
  15. F

    Hedge trimming in August

    I have some fields of wheat stubble and want to trim the hedges before I reseed them. Has anyone applied for a licence to trim hedges in august and know of it's worth the effort. As some of these things application proccesses are simple and some can be a complete pain in the backside Thanks Frank
  16. F

    Mcconnel hedge trimmer

    I have a few queries about a new mcconnel hedge trimmer and wondered if anyone could help me out. Firstly, on the motion controller with the short joystick, how do you adjust the head angle. I guess forwards/backwards/left/right is up/down/in/out, correct me if I'm wrong. I can't see how you...
  17. F

    LED's on a telehandler

    Last year our old worklights broke on our merlo so was going to replace them and wondered if LED's are the way to go. Does anyone know where the best place to get them is. The local places have some but they look crap. Not looking to spend too much and don't need to light up the whole farm...
  18. F

    Massey front weight

    Our 6480 came with this front weight when we bought it last year and I want to take it off. Is it possible to remove it without taking the front weight holder and the front of the frame off. Thanks Frank
  19. F

    Massey front weight

    Our 6480 came with this front weight when we bought it last year and I want to take it off. Is it possible to remove it without taking the front weight holder and the front of the frame off. Thanks Frank
  20. F

    Mowing technique

    This year we will be running a front and back mower for the first time and are wondering which is the best way to mow a field. Is it to mow out and back along the straightest hedge as you would when raking or to split the field in half and then work on each half like you would with a single back...
Top