Search results

Running 480/70 R38 on tractor at 72" centers and 16.9 R38 duals . The duals are a bit wider than 3m but no adverse marks or poor emergence .I normally take them off going between for going to an out farm I work for a neighbour. Ran the 7840 with 16.9 on tractor and dual previously also with no...

Looks the same as on my P7 3cx.

There should be an extension on a wire beside the tank to extend out the neck to allow you to fill with a can. My dad has an 801.4 also and his has this extension piece. If I'm at his place I will geta pic.

A dog constantly barking is worse than anything.

I did a lot on them over the years they are a good old work horse. The price of parts being the bad thing about them.

I always liked the TH 62 and the builder spec 63.

Picked this up this evening and a monsoon then fell on the way home.

A new blade and slide it under them. RS also make a good sticker solvent removal aerosol.

Put up a clearer picture of thr discs and blades the look to be on incorrectly.

The ultimate machine for your farm track maintenance.

@Carters . Thats his number I found it on done deal.

Made a start at spring ploughing.

I made the ladder last year. The pin on the L/H side is hard to get out. Can you remember any other features just to check it's the same trailer.

Converted to a steel floor instead of wooden. I bought it at the local machinery auction 2 years ago.

Normally 2 positives a pull in coil and a latching holding coil.

Normally the line relief for the breaker is set to suit the breaker that you are fitting. If it's switchable to double action there will be line relief valves on the valve chest also.

There is a chap in Monaghan I think called Damien mcKenna brings in parts like that from.the continent. He may have a Facebook page.

These are like a metal cable tie used for supporting over head cables to keep them up on cable trays in the event of a fire.

If it was blue it would be an 8160 100 hp