I have a leak from the fuel pump on my 7840. Can the fitting in the picture held in with the circlip be removed with upsetting some thing in the pump. I presume it's just an oring on the fitting.
Wanted dash same as pictures, its from a 1990 3cx grey cab. It's the fuel level gauge I'm really after. Connections at the back must be the same. The same type of panel was used telehandlers from the same era.
Hi all.
My Ford 7810 needs new tyres all round. The brand will probably be Cultor as that's what the local tyre man seems to be pushing these days. I'm currently on 16.9 R38 and 14.9 R28 the plan is to go a bit wider and fit 480-70 R38 and 420-70 R28 am I correct with this tyre size . I have...
I am considering buying a pa 93. It's semi independent how does this compare to independent hydraulics.
Is the valve block suitable for independent operation if I change the pumps to suit.
Thanks
Vincent
Here is a few pics of a subsoiler I have started to put together. It's using shakeaerator legs and a frame made from 100x100x8 mm box. I got a friend d to weld it up with his mig, after tacking the frame together. Disks and roller parts still to be made and added.
Hi all.
Would any body have a parts manual for a Vicon LZ 304 in pdf format.
I'm having difficulty getting parts such as the belt and a new air hose.
It would be easier if I had a part number when I go to get parts.
Thanks in advance.
Vincent.
Hi all
The power steering pump on my 2001 pajero sport needs replacing and I can't seem to get a spurious part, so does any body know if there is such a thing or would the same pump have been used on another model. Not keen on one from a breaker as it may be as bad as my own.
Evening all
I recently had a bit of an accident with the induction hopper on my sprayer and the dealer can't source me a new original part.
So I'm hoping that the power of TFF will come up trumps. I can get a replacement hopper but I'd rather an original either new or second hand. I have...
Hi all
I'm looking at a spearhead 550 excel with servo control at the moment. It's in reasonable condition but has had a repair to the arm joined to the head and it's a 3 point with A frame attachment .
Any thoughts or known faults with these machines.I will prob be running it on my 7610 .
Would any one have the part number or a supplier of the telescopic rods for raising the pick up hitch as the genuine parts are a steal.
Thanks,
Vincent
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.