barley is really fast growing and competitive maybe I should hold off for a bit? I have some grass weed patches here and there. maybe the barley will outgrow the grasses?
like the title says is axial hard on winter barley? wondering if it slows it down or causes phyto like dff
once i sprayed puma on a section and it killed the barley completely roundup styles lol
yesterday i was doing a lot of soil tillage and towards the end of the day i got this error many times, tractor made a clunk lost drive and this error popped up, i had to restart and it drove again
hydrostatic valve #2 error? its a CVT, usually happened when changing driving direction and or...
perfect! seems to have done the trick, i had to turn it 2.25 times. i replaced this cylinder last year before and i just made the left side the same as the right not thinking what it could be for. within 2 years of buying it new i got both cylinders repaired they were leaking oil. the shop said...
perfect! seems to have done the trick, i had to turn it 2.25 times. i replaced this cylinder last year before and i just made the left side the same as the right not thinking what it could be for. within 2 years of buying it new i got both cylinders repaired they were leaking oil. the shop said...
this one here? so I take it the adjustment is responsible for the length of the cylinder when it's retracted only? and not expanded as to not affect the level of the boom?
ok so my uf02 on one side when folding boom for transport the left catch is folding too much towards the inside. once I had the opposite problem on the right side it wouldn't lock in the catch. the boom is perfectly level and in a straight line. one time tech fixed it by adjusting something but...
ok I can confirm issue was sdd actuator in the steering unit which caused all those errors including bad seat sensor preventing tractor drive
installed new steering unit all error codes gone tractor works again
my fields are too small and i have to turn around too often, cant live without it
anyone know where i can buy a replacement actuator? I can't make out the manufacturer of the unit. something made in Italy? looks like OGNIBENE
i have a deutz error code U91, the sdd (faster steering function) is broken, regular steering still works
there is a 3 pin actuator/sensor that is inside the unit, i'm looking for a way to fix it or replace it. deutz says the part exists however factory has no replacements available wtf
prefer...
so i have a bad SDD sensor in the hydraulic steering block, maybe from all the hammer banging trying to get steering wheel off. error U91. anyone know if this sensor is replaceable, or i have to buy the whole block? does danfoss make a replacement?
thanks
ok, I have an update. I found a specialist Agro electrician he found the problem. hydraulic block sdd steering sensor is bad was causing a power drop on the rest of wiring harness causing more errors. if we unplug it the tractor drives again. error code U91. earlier I erroneously wrote it was...
ok here's an update, soybeans cut, drilled wheat no till after the beans, fert and seed discs only, results are amaze but beans don't have a lot of residue
below one pic of the soybeans from that field couple posts up, and pics today of wheat drilled 2 weeks ago using trimble range point rtx...
has to be a short somewhere, i unplugged the related items the computer lists as faulty and no improvement. i cant find where T124 sensor is, something to do with brakes?
T15 - seat sensor, actually took apart the whole entire seat, tested every cable it works, 500ohms when driver seated works...
well happened again. I tried to replicate problem but it's not easy. I was parked and started bending and yanking on all the cables and connectors couldn't get it to error.
these are my error codes, always the same ones... T15, T18, T65, T122, T124
ranges from seat sensor, to joystick, to...
ok I checked all 8 error codes, 2 were joystick in the seat. after that "jolt" when I shot up with the seat the conduit must have gotten pinned under the frame. anyway I wiggled it around along with those 2 cables problem fixed lol
how ridiculous is that one tiny cable somewhere frayed or poor...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.