Search results

Trying to find out the make of these rocker switches in my MF6716s, they fit the same cutout as a Carlingswitch, but the actual rocker bit is smaller, I need one so I can fit a lightbar to tractor, would rather get the proper switch and keep everything the same than get a Carlingswitch from RS...

Does anyone know the amount of refrigerant gas is in a Massey Ferguson 6616 air conditioning circuit? Looked everywhere for a little sticker that tells you but there isn't one (or can't find it). Many thanks.

I have both a Tier 3 6616 and a Tier 4 6716s and I have found that the 6716s seems to use a lot more adblue than the 6616 per tankful of diesel. They are both doing comparable jobs at the moment. Would a Tier 4 engine be expected to use more than a Tier 3?

Has anyone out there ordered parts from a manufacturer and its taken ages to get them? What is the longest time that anyone has encountered?

Anybody got a decent MF50EX Farm Handler, would be interested in one.

Has anyone else got a Massey 6700s series tractor? The problem I have is as follows: On my 6600 series the factory fitted front linkage has 2 valves on top of the rear spool block, these can be turned to lock the linkage, have the linkage work so when put down it can be either powered or under...

How many dealers out there stopped giving out their franchise machinery calendars out? Surely with the price of new machinery nowadays and the amount spent on it, a free 2017 calendar from the main franchise of what has been bought in the previous year is a great bit of publicity. Basically its...

Getting T1.24 error code and gearbox won't change up for a few seconds then works fine again for a while. Any ideas? Says in manual Range sensor and Range solenoid valves do not correspond.

Anybody have any idea what No. 16 - a red warning light is, comes on after tractor revved over 1200rpm, then goes off again when under. According to the book its "not used". Any ideas?

Click on the photo to enlarge. I've had the ram manufacturer reject this 5 month old ram for a warranty claim. I cannot work out how or why it has caused this. Researching on the interweb it says possible contaminated oil, or the gland had a manufacturing defect. The oil was supplied with the...

Had a 5 month old machine develop a couple of bad oil leaks last November, rang dealer, someone came out took a look, took photographs said he would check to see whether both of them would be covered under the warranty. He went away, rang me back about a fortnight later to tell me he had the...

Around this time of year when you need warranty work done, how long is long enough to wait before kicking up a fuss to get a mobile fitter out to a piece of kit that has silly faults that would take 30 mins or so to fix?

Does anyone know how to remove the latches from the axle brackets, have removed my trimmer but had one hell of a job as the latches seem to have seized up and want to remove them to oil and lubricate properly.

Need one of these, can't really find anywhere online that sell them other than these, will have to go through my dealer to get it. http://www.kramp.com/shop-es/en/365048/539058/391926/Friction+disc+D%3D141%3B+d%3D77 Does anyone know of anywhere else that may sell them?

Anyone got any idea what error 134 is on an MF6470? @MF-ANDY

Having problems on my 6470, when headlights are on and the cab top work lights are put on, the lights go off, the dash lights all come on and it stops drive, no error codes or anything tho. It works fine with just the headlights on, anyone have any ideas?

Anybody had problems with these?? At the moment one of mine is click click click click clicking when trying to start it now and again, thinking its the isolator switch as it isn't consistant with a starter motor problem. Tractor is 4 1/2 years old never had any problems with starting until...

Anyone had any experience with Votex flail mowers, swapping one of my in-line flail mowers in the new year and was wondering what they are like.

Anybody know how to change the display on a 6400 series MF from kph to mph, using the left hand data screen? I changed it ages ago but cant for the life of me remember how to change it again without dealers laptop.

Anyone know of somewhere that sells cut conveyor belting for use as a guard on a flail mower?