Snap, same situation here. Didn’t get on with pattern ones for my delaval shells so I went milkrite exchange. Much nicer to use and stay on the cows a lot better than the delaval ones. Would never go back. I’m on the non vented ones as my milk meters didn’t like the vented ones so make sure you...
Yep, @Beef farmer is probably right it boils down to being tight but I take them off at pd + and put them back on at dry off. Cows are in the race both them times so it doesn’t make another job really. Only use them for heat anyway. Got 80 collars here for 150. Balance seems to be about right
No good on you, too high here on the black downs to find stuff like that. Big old flint field stones is all we have, just don’t take it for granted :D:cool:(y)
I’ve a cow care one, can’t fault it. Initially I didn’t like the big square bit on the end but it doesn’t effect cow flow. Bear in mind where you are going to place it, I blame my auto bath for stirring up formalin fumes more so than a standard one it replaced.
Future reference for anyone. Mine wouldn’t reset, just stuck saying off. The internal trip was off. I had to have a new display. Loheat very helpful. All working perfect now and the internal trip gets pulled down when it’s on
Anyone else had problems with the blister control buttons on a newish serap tank.
I’m on my forth pad in three years. Usually it’s the stop button that fails first. It’s the only one that has caused problems according to my engineer
ta
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.