Search results

Just thinking aloud here.. Getting on for spring barley,maybe better off with something else. Thinking a couple of ton of grain maize off the 10a might be better. Would be all fed in house to beef. Can sow it with the combi, Have small conventional combine header to cut it(if it will do it)...

Rebuilding a engine here,had new pistons Book spec for stick out is 0.03 to .3mm These currently stick out .4mm. Take pistons back out and deck them or use a thicker head gasket from a different variation of same engine?

anyone used these guys? seen a few bits at decent price, just wondering on quality etc thanks

have in my head to get 1, would like no subscriptions, and a soil thermometer if possible as well as the usual whats out there?

Have 2 of these mounted to the front of a powerharrow,can anyone help id the leg or the point Leg is 670mm long x 50 wide x 25 thick Point is 260x40x16mm ,55mm hole centers Dimensions of the point are approximate due to wear

Anyone know the precharge pressure for the nitrogen accumulator?

Got a fan speed sensor here broken and trying to match 1 up 12v 2 wire How do i know if its NO or NC?

Will 500 tyres(19.5x24) fit on the rims for 460(17.5) tyres and be ok

what are the above like? hardley a stone here so no need to worry about that

Loaded fine,100% at home here, no known issues with it Driver opened door other end and beast just slumped down dead on floor, Suspected heart attack most likley Is it common? ive never heard of it before Agent has never seen it either What happens next? Where theres livestock theres...

anyone able to work how long the pivot 87mm should be so the 1 end travels 225mm instead of 125mm i cant!

got the true test eziweigh7 here and twice now its wiped its self of all cattle weights stored on it switches on and weighs the cattle fine then i take the ew7 into the house and plug it in via usb to download the data and its empty, wiped clean bloody annoying, anyone know why or a workaround?

This thing is like dragging a parachutedriving empty into a decent headwind feels like 4 ton behind,turn round loaded feels lighter🙈 Can tow a 510 horse trailer way easier with its angled front! Any ideas for the stockbox or pickup?

Just seen it on the tellybox👍👍

thinking the ground here would benefit a press of some sort clay loam over sandstone ploughs nice then a few days of sun later and it bakes hard find a press arm for the 122? front dowdeswell type press? press arms need a spool to release the press?

Got a field destined for beet in the spring PH 5.4 currently permanent pasture Could i plough it ,apply 2t/a,work it in then apply another 1.5t? I know it's frowned upon on grassland to apply more than 2t in 1 go

Reseeded in spring Cattle been in less than 24 hoursand had a salt bucket with them all summer F*&%£@s

What's involved? I'm completely green to it,usually go with hedge trimmer in flailing class but never get a good bit of hedge🙈🙈 Think I'd have more luck with a plough🤣

parts of my fodder beet is full of charlock its had 3 sprays of debut and others before but the bloody charlock is thriving over about a third of the crop is there anything that will tidy it up and save what beet are left ? bit gutted about it as normally get a reasonable crop but this 1 is...

As above 13.5k hours 40%tyres Below average wear in the boom Everything works,a/c,front/rear wash wipes All lights etc Recent engine overhaul Looking for ball park figure🤷‍♂️