Search results

You need the "Where the fox at" app I'll get my coat!

Hopper holds a cu yd which I think is about 1 tonne of lime. Looks more compact and simpler than the bredal belt floor arrangement.

just come across these on YouTube, is there a UK version similar or anyone importing them? Spread pattern looks a bit iffy for fert but looks a handy tool for small quantities of ag lime versus the dreaded prilled version.

This is what my idea was based on without the fancy hitch which would totally fry my brain. First few hours was serious hard work, as you're trying to press and drag with the rear of the leveller which is the reverse of normal. The length helps to avoid it pitching too much. A pro with a...

Made a basic channel frame which worked well enough. Problem was the excess material would build up in front of digger so added the edge to move it away/ dribble some in low spots. Added a mount for laser receiver also. Tilt makes earth bankings a piece of cake also.

Yes, a sxr6000.

The plan was to move the topsoil then to sell and put money towards a tractor. But it's a handy tool.

Thanks for the help folks. I have a large stockpile to move 300m down a gravel track. Have been looking for part worn 405/70x20 but seem overpriced compared to budget new ones.

Ah ok, didn't see a diff between front and rear. Was worried it would be like a Landover with centre diff locked.

I have a 6 tonne barford dumper with 30% tyres. All fairly perished. One has a damaged side wall that is looking a bit iffy. If I replace 1 or 2, what are the chances of winding up the driveline? If one wheel slips then you come to a stop. Trying to avoid major expense of 4 tyres.

We had this prob and sent valve block off to be checked. Turned out the shaft bearing had partially collapsed.

Could the trailer ram have a parachute valve fitted. Had this on joskin trailers, if body lowered too quickly the valve would lock, had to lift slightly then feather valve to lower slowly.

A few interesting answers. Goes to show how random the weather can be.

Does this bring back any memories? [emoji33]

Made a discovery in a trunk in the garage. Find it fascinating reading old newspapers. Some interesting adverts too!

Don't want to be a doom-monger, but have had the shaft driving the vane pump on the end of the rotary pump shear once.

We have built a shed on some land and SSE have quoted 15k for a single phase supply from 150m away. Looking at options to use genny, solar and a battery store type unit for alarm/wifi-link and some lighting without genny running constantly overnight. These units seem fairly pricey. Question...

Yes. Bought a s/h hilux from bentleys toyota, who used to advertise this service. Sticker and certificate to keep with v5 posted out a few weeks latet.