Search results

  1. young bull

    Aftermarket Autosteer for JD 7530? Fieldbee?

    Considering putting autosteer on to our JD 7530 which is not autotrack ready with the FETF47 grant. I’ve looked at the fieldbee system and had a price. How do people rate this system? Is it straight forward enough to use? Are there any other systems people would recommend which would fit the...
  2. young bull

    2014 Murska 220

    2014 Murska 220 spares or repairs Comes with the gearbox No motor Needs new rollers For sale as we upgraded to a larger mill instead of repairing this. £200 Open to offers Collection from Wakefield
  3. young bull

    Lemken D35/70 Plough?

    A friend has bought this plough to go behind his fordson major and we’re not too sure what the boards are on it. Would anybody be able to identify what they are and where we could get bits for them? Or does anybody have any other information about the plough? the mouldboards appear to be...
  4. young bull

    Bradford metal lathe

    Hi, I’ve just been given a Bradford metal master lathe I think it was made in 1942/3 going by the serial number. It doesn’t have any tooling with it and I don’t really know what I’m looking for. Could anybody recommend a good starter set of tooling for occasional farm use? Or would I be better...
  5. young bull

    Claas 2200 baler problem

    Our Claas 2200 baler will bale perfectly for so long but it every so often has started knotting bales 3 or 4 foot long and sometimes it knots every 6 inches which end up hanging on the knotter. It shows a knotter problem on the screen but doesn’t start a new bale on the screen once the short...
  6. young bull

    Best tyre levers?

    Has anybody got any recommendations for some decent tyre levers for tractor and loadall tyres? Currently got a 30” melco ttl3 which seems decent and some smaller levers that aren’t really up to it so looking for some 30” plus was going to order another Melco unless anyone has any other...
  7. young bull

    Burnt out car

    We’ve had an car abandoned and burnt out on one of our tracks last night and by the looks of it recovered early this morning before we were aware except they seem to have winched it 50 yards up the track leaving bits of metal everywhere ready to go in the tyres. Has anyone had any success...
  8. young bull

    Machinery Handler Build

    Been wanting to build one of these for a while and finally found the time! First test run
  9. young bull

    JD 6330 lost drive

    Our 6330 has lost drive it’s come up with the error code EPC524230.03 which reads as proportional solenoid valve for transmission enable stuck in open position. At first I thought there would be a relay gone wrong somewhere but can’t seem to find one relating to the transmission. I then tried...
  10. young bull

    Spurious vs genuine discs for Amazone drill

    I am about to put new discs on our Amazone ad-p special the genuine discs have lasted 2500 acres, I can get spurious discs from Spaldings at £11 or genuine at £24. Has anyone tried these discs from Spaldings and how did they last? Or would I be better sticking with genuine? Tempted by the...
  11. young bull

    David brown wiring loom

    Could anyone recommend where to get a wiring loom for a 1963 990 implematic with a push button start, I can find plenty available for selectamatics but not implematics. Thanks
  12. young bull

    David brown CW2 plough?

    I’ve bought a 2 furrow David brown c type plough which unfortunately doesn’t have the plate and I’d like to know exactly what it is. The frame is 14 inch wide but had a 1 inch spacer in the back furrow to drop it to 13. I can only find reference to 3 and 4 furrow models, although something did...
  13. young bull

    Genuine Landrover Discovery 5 luggage / dog guard

    Genuine Landrover Discovery 5 luggage / dog guard Part number VPLRS0375.LRC Excellent condition as not been used. £100 Collection from Wakefield, West Yorkshire
  14. young bull

    Aircon Regas

    We've just fitted airbrakes to our 6330 and I need to get the aircon regassed, does anyone have any recommendations for firms in West Yorkshire? Thanks.
  15. young bull

    Shed clear out

    Few bits for machinery we no longer have, all metal is new. Cousins subsoiler shin X3 4" wing + bolts Right x3 left x3 cast point (straight top edge) x3 £60 the lot weld on furrow splitters x12 £20 JF forager knives 2 boxes (5 in a box) + other bits £75 Kuhn mower skids £40 the pair...
  16. young bull

    Hydraulic brake load sensing valve, eurosafe braking system and brake rams

    Hydraulic brake load sensing valve, came off a 2015 Bailey bale trailer that we converted to air brakes. £250 + VAT Hydraulic brake rams off the same 2015 Bailey trailer complete with brackets and springs £75 + VAT Eurosafe braking system no longer required as we’ve mostly converted to air...
  17. young bull

    Laurona 12b SxS

    Laurona 12 bore side by side for sale. Double trigger non ejector. Nice condition, nice and tight, barrels in good condition. 2 3/4 chamber 27 3/4 inch Barrel 14 1/2 inch Stock Can send more pictures if required viewing welcome and can be tried. Social distancing etc adhered to. Wakefield, West...
  18. young bull

    IAE Creep Feeder

    IAE creep feeder can be moved on the 3 point linkage has a rack for hay. Viewing welcome Collection from Wakefield, West Yorkshire. £250 open to offers Call 07710 850587
  19. young bull

    Pig muck insecure load

    I have been leading pig muck recently and I was pulled into a lay-by for a vehicle safety check and was fined for an insecure load because I didn’t have a net over the pig muck. Has anybody else had this happen or heard of having to net every load?
  20. young bull

    6330 PTO throwing out

    Had the 6330 on the straw chopper this morning but it threw the PTO out and came up with the error messages communication system TLS/CSC without function and then transmission with restricted function. Any ideas what’s wrong before we call ripon?
Top