Search results

I'm looking for a pair of more narrow wheels for the maize drilling tractor. Current tyres are 420/85R38 and i'm looking at replacing them with 320/90r42 but these would be 40mm less in diameter (420 are about 1670mm, 320 would be about 1630mm) Would there be a problem with the 4 wheel drive?

I have a tractor with a Starfire 3000 antenna and since a couple of months ago i started having problems with the GPS signal, it keeps dropping sf1 and going to egnos, wich i can't use for steering. The antenna has been on this tractor since new, we don't take it off except over winter. Also, it...

I have a steel fuel tank that started leaking after the last fill. A couple of years ago, when i got it from an ex-farmer i had it cleaned on the inside and there was a lot of rust and orange peel like surface on the bottom. Can it be sorted or should i just scrap it? The leak is at the bottom...

Hi all, I've been having engine trouble with this combine since i got it second hand (wonder why it was sold... ). It's a 2010 John Deere T550 with a 6068HZ482-DD21359 engine. The problems were intermitent in the beginning but now got more constant and disabling. It's throwing the ECU 1347.07...

My wheat has it's flag leaf fully emerged and i want to give it some N. The problem is that there's no significant rain in the forecast for the next couple of weeks so i was thinking i would spray some urea + epso top on it to give it a boost. How much urea can i use per ha without schorching...

I think (hope) we passed the peak in many markets like energy, grains, fertilizers. If China will get back on track sometime next year and we'll see a deescalation of the Russian war, do you think the on-farm price of new machinery might drop from the current levels?

Is anyone running a newish case ih combine and is willing to help me with their OSR settings? I just started yesterday and can't get a clean sample. I get a lot of pod tips and bits in the tank with the standard settings. I tried closing the bottom sieve and the presieve all the way but it's...

I am considering buying a used Bateman sprayer from UK. Besides the phitosanitary certificate, what other formalities are required? Will i be paying VAT or not (i didn't have to pay it before brexit)? P.S Anybody selling a good RB25 or 26 24m?

There's a really loud squeak noise coming from the back of the tractor when turning the steering wheel. I think it's coming from the priority valve next to the SCV's. I checked on the JDParts and there's a number of valves and springs inside. Here's an image from jdparts and a video of the...

Noticed this morning that the rabbit and tortoise on the gear selector are blinking and also the left pedal that disengages drive doesn't do anything when pressed. Other than that, it works as it should, changes gears and everything seems ok. Any Merlo experts around? Thanks

What could it be? it's below 10 degrees outside. had this happening once in a while but never when it was this cold out. New genuine oil and filters put today, the old oil wasn't black, put a magnet through the old oil and there was a very small amount of very fine metal fillings which i...

I have a 6195M that is pulling a Rapid A400S with isobus and ipad. How can i get it to correctly record the coverage on the map, i.e. show a blue track only where it drilled? The spools on the tractor are manual so can't trigger the coverage with the lift/lower command

I will soon need to renew my sf3 subscription and wondering how much would it cost to go RTK. I could get NTRIP corrections for a really good price and mobile coverage is good in my area

Is there a part number for the adapter from a female connector on the vaderstad free flow hose to a flat face connector on the back of a 2019 JD6195M?

Looking for a set of 4 telehandler tyres and one tyre for a combine. Sizes are mentioned in the title. I am nit from the UK, but if the price is good, i will arrange pickup.

The hole where the unfolding cylinder is attached is not round anymore. I want to enlarge it and make a bushing. The only problem is that it's part of the main chasis so i can't dismantle it/take it to a mill. What options do i have?

My brother has a 1ha 3 year old lavander plantation and after seeing how it performed in the first two production years, i think it might be an interesting investment. Does anyone know of any larger scale plantations?

the turbo actuator on my 6115M, ~3800 hours, just crapped it's pants, probably some gear inside is broken, as it sticks in one position. On the turbine side the linkage moves easily. I can get a new actuator and new linkage (current one is a bit worn) for ~1000 Eur + VAT or a reman complete...

I need to change the workload for the above mentioned tractor and it would need it to do a lot of spraying with a trailed sprayer. The thing is it has only one PTO speed, that is 540 @ around 1970 rpm. Is it possible/viable to add 540E speed so i wont have to run it so hard?

The AC system on my JD9540i has started playing up. There are no error codes and the AC compressor clutch engages for very randomly short periods of time. Sometimes it would start to cycle normally, like stay engaged for a few tens of seconds, then disengage for a similar period. Has anyone...