Search results

anyone knows, can ZA-M spreader (ProfiS) equiped with Amatron+/3 and Comfort package be section controled by GPS switch, Amatron 3, or other GPS device (FMX)?? or it must be only Hydro version?? I know, hydro has predefined 6 sections, but if it is not hydro, it should also be capable to run 2...

I have an amazone uf sprayer with amatron 3 computer using with gps switch section controll in amabus mode, working great... I also have ZA-M spreader working with amados + computer.... now I want to upgrade my spreader to work with amatron3, so I dont need to replace screen al the time, and...

Is there an other way to make a fully functional field boundary then using the headland mode? I would like to make them by using field mark option, while driving autopilot on exsisting ab lines, which I have already made in my fields… I tried that today, but when I finish boundary, it is saved...

We are drilling soyabean after winter barley like a secondary crop with vaderstad rapid drill… first pass we go with vaderstad carrier 650 disc harrow, and after that we go drill… and have troubles that drill can not penetrate and put seed deep enough, because after carrier pass there are lots...

Does anyone have pinout of ag Leader 4000315 cable?? It is 12 pin deutch to a male db9 standard cable… I need that cable to connect a vaderstad control station to the ag leader application rate module… I have already had a 4000309 cable with female db9 on its end, and I tried it with a null...

I want to upgrade firmware on my ag262 receiver to a higher, so I can use modem to receive rtk corection data... I have instaled version 1.xx, and it should be 2.0 or higher.. I can only find the newest version 5.2 or 5.1, but flash loader doesnt want to instal them... anyone know where can I...

hi... recently I have bought a used mf8660, with trimble receiver 252 on the roof, and ag leader insight monitor (autosteer unlocked) in the cab, and there is, in the cab, on the right one missing part, some computer unit... i think there fits trimble nav 1 or 2 controller, but I am not...