Search results

Yea me too. I’ve got two of them. So maybe a 135 would be a good upgrade

Really can that be done? A turbo? I was looking at a 135 originally but didn’t t think it would be powerful enough. Reason I’m looking is I have to keep rebuilding my 35 every couple of years because I’m doing way too much work for it.

I thought the 35 4 cyl diesel was the most powerful 35 or have I got my figures wrong. yea true maybe a 65 would be the next best one.

What’s tafe? Not heard of them.

Hi all. I am after some advice. I currently have a Mf35 4 cylinder diesel which I use for work purposes. I would like to upgrade to something a bit more powerful but the concern is the gross weight of the tractor. It has to go on a car transporter and ideally I’d like the weight to be roughly...

Just thought I’d let you all know what we ended up doing in the end. We decided to get the head redrilled and had 4 glow plugs fitted. Since this has been done it starts every time and within one or two revolutions of the engine. No smoking nothing. Ok it’s not original but hey ho. if anyone...

Hi Guys I have a MF35 which had an engine rebuild about two years ago. I have been running it on pink OAT antifreeze and have had no problems. I was speaking to a tractor 'know it all' and he said that by running it on this is the quickest way to ruin your engine. To be honest he was very...

Hi Guys I want your opinions. I have a MF35 and have rebuilt the engine two years ago. I replaced everything on the cooling system (except the pump). Even changed the radiator. I have been running it on a Pink OAT antifreeze and have had no issues. However i did notice today that my thermostat...

Hi we have a case 895 and are trying to get the fuel gauge to work on the digital dash. It is currently stuck on full. I have unplugged the cable on the sender unit and there’s no change in the gauge reading. I’ve also earthed the cable and still no change. I’m wondering If somethings been re...

Yea that’s what this one’s like now. I didn’t take it quite that high though. Must admit. Lost my bottle. Thanks for your help though.

So just an update. I’ve been doing some other work with this tractor and have had it in the workshop. Upon looking at it I’ve found out that someone had removed the thermostat. So that’s why it wasn’t getting hot. While I was there I did change the water pump but only because I was there with...

Hi all. Just wanted to give you an update. Ok so I managed to test the flow of the pump. It was doing 25lpm. It should be 50 I think. I’ve stripped down and changed the pump and what a difference. OMG it’s unbelievable. The loader works on idle and so does power steering. If you let the loader...

Thank you for the reply. I may just do that. 👍

We are not too far from Maidstone kent

I’ve just taken one of the pipes off which feeds the heater. There’s coolant coming out that connector but nothing really coming back down the heater pipe. I’m starting to think the water pump isn’t working as surely this should be full of water? Is there a bleed valve that you know of for the...

So just an update. I’ve found the two pipes and they are actually connected to the engine. I’ve taken the tractor out and got it warm. However the radiator pipes are not massively hot let alone the one that feeds the heater. Could this be a bad thermostat or even a bad water pump? Checked with...

Hi yea that makes perfect sense. I’m hoping it will be here soon. It’s good to know that it’s an option. Your right though I bet getting hold of the parts could be a bit of a pain being the age.

Hi all I’m after some assistance again. We have a case 895 and have been wondering why the heater does not work. After resoldering the joints to the heater I found a cable disconnected, so resoldered but now we don’t have any heat. I’ve felt both pipes and they are stone cold. I’m suspecting...

Thanks for the reply. I think that’s the same as ours. It’s a shame as they’re not a bad tractor but the hydraulics are appalling. Did you find out what your options were to improving them?

Agh gotchya that make more sense! Do you think it’s more of a flow issue at the mo then?