Search results

Hi all. I am after some advice. I currently have a Mf35 4 cylinder diesel which I use for work purposes. I would like to upgrade to something a bit more powerful but the concern is the gross weight of the tractor. It has to go on a car transporter and ideally I’d like the weight to be roughly...

Hi Guys I have a MF35 which had an engine rebuild about two years ago. I have been running it on pink OAT antifreeze and have had no problems. I was speaking to a tractor 'know it all' and he said that by running it on this is the quickest way to ruin your engine. To be honest he was very...

Hi Guys I want your opinions. I have a MF35 and have rebuilt the engine two years ago. I replaced everything on the cooling system (except the pump). Even changed the radiator. I have been running it on a Pink OAT antifreeze and have had no issues. However i did notice today that my thermostat...

Hi we have a case 895 and are trying to get the fuel gauge to work on the digital dash. It is currently stuck on full. I have unplugged the cable on the sender unit and there’s no change in the gauge reading. I’ve also earthed the cable and still no change. I’m wondering If somethings been re...

Hi all I’m after some assistance again. We have a case 895 and have been wondering why the heater does not work. After resoldering the joints to the heater I found a cable disconnected, so resoldered but now we don’t have any heat. I’ve felt both pipes and they are stone cold. I’m suspecting...

Hi I was just wondering if one of you gurus could help. I have a hydraulic problem. We have a case 895 and the hydraulics are appalling on the loader but great on the rear arms. The steering is ok too. I’ve changed the hydraulic oil, filter. Bled the system by undoing the hose going to the...

Hi I have a mf35 1959 4 cyl diesel and I wanted to know if it was possible to fit a diff lock? Also if it is possible, what parts would I need? I am quite practical and have rebuilt the engine on this mf35 but before I tear the rear ended to bits I wondered if anyone else had done a similar...

Hi We have a MF35 4 Cylinder Diesel and we need to do an oil change. What oil can I put in this and what are the recommended oil change times. Any help would be appreciated

Hi everyone. I have just found this forum and thought I’d ask for some advice. We have a 4 cylinder diesel MF35 and it is a real pain to start. We end up having too jump it from another tractor as it ends up killing the battery. However once its been running and is hot, it will stop and start...