Search results

Yes that’s the plan. Our drill is grain only. Plan is to premix seed and dap .

We are wanting to drill Dap with our spring barley. Will we get any seed damage if we put 100kg of Dap with 175kg of seed?

He does have a choice. The NFU also rely on contributions from their farmer members.

Personally I think Tom will try to talk members into thinking GFC is a Wonderfull idea. The NFU are like the Conservatives they are in self destruct mode unfortunately

This in a nut shell spells out why Red Tractor and the NFU are totally out touch with reality. The NFU leadership can't see the wood for the trees.

Lets not side track this debate into the merits of VR N

It all seems a bit fishy...

Having yet to hear any farmers wanting the GFC to be a requirement of the Red Tractor, I suggest all NFU members contact their local representative and strongly stress we expect them to firmly oppose the inclusion of the GFC in to the Red Tractor scheme and are uninterested in any reports on...

Min 25t ideally 37t . Rubbish is Plastic, glass and any metal a magnet can’t remove.

You need to put plenty of compost on to make a useful improvement to your crops. The down side of compost is the rubbish in it in our experience.

Which am I best to buy. Do the plastic have as good airflow as the metal ?

In the process of ordering some pedestals for a new store. Plastic damages less than metal but is the airflow as good ?

Hope they have sorted this issue out in the new one ! This is the second CR we have had this issue with in big crops of Rape.

Have you experience of running the chopper on the slow speed ? if so does it chop it ok ?

Belt Tension is fine, and we do get a warning the belt has stopped. The straw isn't dropping in to the chopper. 2 10.90s locally suffer with the same issue.

I hope New Holland have sorted out the blockage issues in the straw chopper on this new CR.

Our CR seems to back up with rape straw on the PSD belt when chopping. It is a known problem, but our dealer just keeps telling us the crop isn't fit. I have run other makes of combines and it has never been a problem` Has anyone got any answers ?

RIP Andy you. My condolences to your family.

Horsch are telling me I can't replace the bearings and have to buy the whole hub. Has anyone managed to just change the bearing?

We have a new grain store and looking at different cooling systems. Is anyone using this system or have experience of it?