I went to do a job on a case tractor on a farm and wound up taking a look at his unimog u1000 whilst I was there. Initial complaint was that it was slow to turn over and would not start long story short ended up removing the starter that was fried took out the clutch and the drive in front of...
I'm looking for a crown wheel and pinion for a Mitsubishi Mt 21 compact tractor and struggling does anyone have any idea who deals with these or breakers that may have the parts I need thanks in advance
Were stripping a Massey 8110 after it's broken a synchro gear on low range that's managed to few it's way through 4wd transfer box and output shaft gears nice little job but I'd love a simple service just once in a while
We've just picked up a clutch job on a dB 990 someone else stripped we've put a new transmission clutch in it and refit however it won't release. The fingers are pushed in when the clutch is off and there's a massive gap between the clutch fingers and bearing it only just contacts the fingers on...
Got a call on Saturday to check out this combine. Fitters had put a head gasket on it. It did a day then the oil light came on and there was no oil pressure. John deere tech had looked at it and told the guy it was a problem with the head gasket and an o ring wasn't put in correctly on the head...
I'm thinking of signing up and supplying farm trackers to farm machinery if anyone in the north east would be interested please get in touch. Came about as my wife's car was broken into last week outside the house. As well as stealing all the loose change in the car he stole her police tracker...
Were looking to return to France in September to do a little work on a farm in Limoges, if we can be of use to any french farmers or ex pat farmers looking to get repair work done on their tractors or machinery please get in touch all work carried out from servicing clutches, transmission...
4455 going together slowly and fighting every step of the way cab going on on Thursday then the big test new powershift fitted our biggest job to date...
Does anyone know what the circled connection usually runs too doing Sanderson engine with a ford engine, this connection is not connected and is throwing oil out , could I block it off or does it need to be connected to something
These are a few shots of a head gasket job we did yesterday on a case. I had the head skimmed, new valve seats fitted and during the final stage of installing the head we noticed the oil feed pipe to the turbo had been welded shut.. I had a word with the owner who had told us they bought the...
Case blowing through crank case.
Sanderson transmission fault worn clutch pack.
Broken studs on a Honda exhaust system
Old deutz serviced and a clutch on a 135 no photos yet. Busy week thankfully
Our first John Deere powershift strip down 24 hours in. Parts are now being ordered, before the rebuild starts. There's only three tables full of parts?
Tested this week I got dropped in the deep end with this case had been stripped down by a lesser mortal all bolts scattered to the winds hydraulic clutch plates in no order and thrown about the bench I had a box full of parts missing bolts extra spring plates and shims in the old hydraulic...
I was called out to this today the guy is an 80 year old that's been struggling on with this machine for a while it devoloped a fault overnight it stopped working in forward when I checked it today it was trying to reverse in neutral reverses in reverse but absolutely nothing in forward I...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.