Search results

  1. Chrisw

    Sam 3

    Why is that 2tractors? We have put all out PP into SAM3 this year, and Having taken advise on it "improved" means it has had something fert or sprays or some kind of improvement in the last 15 years. Or have I missed something here? What do you know that I don't??
  2. Chrisw

    Combinables Price Tracker

  3. Chrisw

    Combinables Price Tracker

    Can't read it, subscription only.
  4. Chrisw

    Combinables Price Tracker

    Maybe the governments hope to stop the protests by bankrupting the farmers??
  5. Chrisw

    Combinables Price Tracker

    Exactly this
  6. Chrisw

    FG12 FG1 FG2 RPA Requirements.

    Sorry, I am not aware of anyone at the RPA of DEFRA that knows what they are talking about when it comes to farming operations.
  7. Chrisw

    Fuel price tracker

    And OSR is dropping off a cliff! Thought the merchants always said it was linked to crude price (when crude was dropping)!!
  8. Chrisw

    Kuhn 40.1 speed signal

    No, no idea what the blackbox guves out, was hoping to only have 1 gps screen, but the only one that seems to work is the blackbox and need to be spreading tomorrow, so needs must.
  9. Chrisw

    Kuhn 40.1 speed signal

    No, didn't have testers for that, unfortunately. I was relying on the pin out diagrams for both the quantron and the iso socket to be right, and also tried other combinations that people had had success with, but alas, none of them worked. No idea what pins provide the signal from the blackbox...
  10. Chrisw

    Kuhn 40.1 speed signal

    Tried all the pin combinations from both the 7 pin iso tractor socket and combinations on the 8 pin quantron end and just couldn't get it to see any pulses, so had to go back to putting the blackbox back in to provide a speed signal :(
  11. Chrisw

    Kuhn 40.1 speed signal

    I am guessing it has, 2013 case puma. thats where I am thinking pin 2 on quantron to pin 7 on the tractor iso plug.
  12. Chrisw

    Kuhn 40.1 speed signal

    So trying to get my head around all of this, I can either wire up an 8 way plug from quantron to 7 pin iso plug on tractor using pins 1 on tractor to pin 7 on quantron for radar and pin 7 on tractor to pin 2 on quantron for ground...... or trimble pin 9 on the db9 connector to pin 7 on quantron...
  13. Chrisw

    Kuhn 40.1 speed signal

    I'm guessing it would be this connector then.... Thw other plug on the pillar is an 8 pin
  14. Chrisw

    Kuhn 40.1 speed signal

    Or is it this socket (tractor end)?
  15. Chrisw

    Kuhn 40.1 speed signal

    And think this is the plug with the speed signal in the cab?
  16. Chrisw

    Kuhn 40.1 speed signal

    8 pin socket
  17. Chrisw

    Kuhn 40.1 speed signal

    Thanks Andy, yes radar output enabled on the trimble. Now searching for a cable, but not sure what Rauch/Kuhn call it.
  18. Chrisw

    Kuhn 40.1 speed signal

    I have a lead that has a serial connector (i think thats what it is called) which fits both the trimble or blackbox and then goes into the round plug on the back of the quantron. Is there a different lead available that would connect the quantron to the canbus plug? Or is there a way of wiring...
  19. Chrisw

    Kuhn 40.1 speed signal

    Having a bit of difficulty getting the Kuhn 40.1 to get a speed signal, can anyone help? I have a trimble 500 and a patchwork advance which I took out of our old tractor. The kuhn was able to get a speed signal from the Blackbox, but the trimble is more accurate so trying to use the trimble 500...
  20. Chrisw

    CNH dome and Nav controller.... what screen would they need?

    Hi Andy, thanks for the reply. The dome and controller are CASE/NH TRACTOR V9.56 NAV CONTROLLER 111, and was thinking if it was cheap enough to get it and match to a screen, but it looks like it will go for too much money so will be going with you as per our earlier chats.
Top