Search results

Having a bit of difficulty getting the Kuhn 40.1 to get a speed signal, can anyone help? I have a trimble 500 and a patchwork advance which I took out of our old tractor. The kuhn was able to get a speed signal from the Blackbox, but the trimble is more accurate so trying to use the trimble 500...

Hi All, Just weighing up options for a GPS ready Case Puma 200 CVX. I have looked at the AgOpenGPS and quite open to that set up, but If I had a CNH dome and teh nav controller, what screen/software would I need to make the system work?

Anyone selling a Mecmar or similar wet grain bin for a mobile dryer? I see there is one in Gloucester but trying to make contact to buy it, through a 3rd party is proving very slow and difficult. I don't suppose the seller is a member on here, are they? Or anyone else selling a wet grain bin?

Hi all, Long shot but do any members on here farm in menorca, by any chance? Thanks

Can anyone recommend anyone who breaks holmer beet harvesters? Thanks

Hi, Is anyone breaking a holmer classic or terra dos 1 beet harvester with the spiral roller bed? I'm after some spiral rollers if anyone has some kicking about. Cheers

Any reasonably priced avadex applicators for sale? Tractor mounted or towed behind quad. Only have 45ac to do, but no one near me has one. 12m would be OK. Anything about?

Hi all, After your thoughts and experiences of self propelled sprayers. I feel its time for me to upgrade my sprayranger, partly because I want a bigger tank (3000l+), slightly more ground clearance (want to go hydrostatic) as we have brought osr into the rotation, and I feel like a change. Have...

Hi all, I have an 818 header that has had some damage to the left side around the knife drive area (only just bought the combine) and was hoping for the usual insight from the members here. To repair the damage will take quite a few parts, and wondered if people would put the time and effort...

As title, anyone have an ag15 antenna that they no longer use, that they want to sell? TIA

Hi, Looking for a MF 7256 autolevel, JD 5 walker hillmaster or a late MF36rs autolevel, if anyone knows of any ones about. Cheers

Hi all, After peoples thoughts and experiences on the 2256 JD hillmaster. Good, bad and ugly? Any independent jobs agricultural engineers in Kent, that people would recommend? Cheers

Hi all, Anyone got an Ez boom kicking around that they would like to sell? Cheers Chris

Anyone selling a spray controller like a 34i? Have a LH Agro that is agro, and thinking of changing. Anything about? Cheers

Not sure where the best place is to post this, so guessed Agricultural Matters would eb seen the most. Are there any members in Devon or Cornwall who have an Opico dryer with a DCM box that I could borrow for a week? My box developed a fault and has been sent to King's but their specialist won't be back...

Hi all, I have just bought a DB990 to rnu my drier, mainly and to do a bit of beet hoeing. Only problem is the link arms won't go down, well not without unscrewing the plunger behind the quadrant lever. I have already taken that plunger out and apart and cleaned it through, then also the 2...

Looking for a 9-12t lpg fired, electric dryer, preferably with a hopper. Older is fine but needs to be in good usable condition with decent central tube and auger. Anything about?

As per title, looking to move a 6 row self propelled beet harvester 3m wide 13t from Lincs/Cambs border to Cornish side of Plymouth. Availability and price please.

Anyone got a 4 in 1 bucket, preferably with JCB Q fit brackets already on it? Preferably 7ft plus as it's going on handler. TIA

Any lorries returning to the southwest looking for a load? Could have a telehandler to move from Ely to the Cornish side of Plymouth, next week.