Search results

Anyone growing rye/hybrid rye for a digester? Pro's and con's? Yeilds?

The farm is in a partnership agreement between myself and my wife. If we were to sell a building plot we have on the farm and reinvested the money in buying more land do you pay tax on the money gained from selling the building plot? I will look for some professional advice in due course but in...

Anyone with a Kramp account able to give me a price for Kuhn plough shares? OEM 622233 Thanks

Is there a 38"rim equivalent to a 800/65r32?

What would cause the lateral float on a 60 series TX to tilt all to one side?. I've cleaned the sensors on both side's of the header, the green light is on on the control panel and if you put your ear to the sensors on the header you can hear them humming but the header continually tilts fully...

Got a opico 600qf and every few loads I've to take the plug out and clean it to get her to ignite. Why would the plug be getting dirty with soot? Is there adjustments to stop this happening?

Got these test results back today, I'm guessing no need for a spd, just get it in the ground. One will be 1st wheat and the other W barley.

Have a TM range command here which I'm fairly sure needs a transmission/synchro Potentiometer. Two questions. First, can anyone tell me if it's the front or back Potentiometer on the side of transmission i need to change? Tractor is in neutral and won't select forwards or reverse. They are...

Is there anyway to revive a dead cell on a tractor/handler battery? I know it's probably more hassle than it's worth but seems such a shame to have to keep replacing batteries for the sake of one dead cell.

Cutting osr for first time with a NH TX6*. Any recommendations of a good starting point for settings? Thanks

Can anyone with a Zurn mechanical side knife on a NH tx6* series send me a few photos of how it's driven/connected to the knife? Thanks

Any idea's where I would get a nose cone for a mla628? Thanks.

Anyone know how much gas to put into a TM130? Tia

There's the odd thread about NH t7 calibration etc but can't find one on a Case puma multicontroller. I did try following the steps for the t7 but cannot get it to work with me puma, so can anyone tell me the procedure for calibrating the transmission on a Puma multicontroller?

Need to replace the main drive belt from the engine down to the chopper on my NH tx6* combine. Only had a quick look but looks a rather big job, do I neec to remove the whole cast housing covering the tailshaft/belts etc? Seems like a pig of a job away up there just to change a belt. Any advice?

Following on from the radio 2 threads where alot of you mention DAB digital radio's, I'm looking any recommendations for a half decent radio. Don't need cd player but handsfree/bluetooth would be a must. Used to mainly listen to Radio 2 but cannot stick listening to it now especially with Ken...

Has anyone got any settings for spreading Calcifert s with a Kuhn Axis 30.1 to 18mtrs? It's just the basic machine I have with no weigh cells etc, just manual setting. I have never spread Calcifert before and I don't see any settings for it on the Kuhn spreadset app.

Haven't grown osr in quite a few yrs but have some in this season. I use a tractor and mounted sprayer and wondering what's best to cover up bottom of tractor and sprayer to minimise damage later in the season?. Thinking I will take puh off as it catches alot and maybe tie a tarpaulin/lorry...

Got a couple of sparex led lights for my TM from the local NH dealer. The rear top ones when I turn my side lights on light up to maybe half power. They are wired into the original wiring for the original halogen work lights. Any idea's what is going on and what I need to do to sort it? All the...

Priced genuine cnh oil against Shell oil. Genuine engine oil £68, Shell £93 Genuine backend £465, Shell £810 I'm surprised at the difference and would find it difficult to go by the oem branded oil given they both meet the required standard.