Search results

You either damaged the switch so it is live permanently or the wires are now shorting together making the 3rd function live, so it operates the 3rd function valve not the crowd.

I stand corrected.

Tried that as I saw it on another thread and no difference

Hi, i have a case ih 885 2wd, one of the last 885s, intratrac say it's actually 895 in disguise, But lately the steering wheel spins but the front wheels don't respond for ages, it's better at full revs but still not great, rear linkage seems to be working OK, no obvious leaks, so thinking...

Did these sell?

I think some models can be UM or US fitting as my 560 is US fitment

480 65 28

Found these and went for it

Hi im looking for a loader for my case 885, must have euro 8 cradle fitted, self level would be nice but not essential. Thinking quicke or trima but anything with euro 8 would do, not looking to spend the earth though. Close to or in Devon would be nice What have you got? pm me with pics and...

Surely that would depend on the trampoline size, and they dont have rings in the end so could fall off, I tried some vapormatic springs, but they are too long. Guess I'll have to measure the gap between the pins. Or buy new rams with the inbuilt springs

Apologies for the resurrection, but I have a ken wooton 12T trailer, and it's missing the brake return spring, which from what I see goes from the pivot pin to a V shaped clip which retracts the ram as soon as you lift your foot off the brake. Does anyone know the correct size spring and where I...

Hi does anyone have any clips or clamps to hold the skims in place on a Lemken DL120 plough? Circled in pic

Ford New holland 7740 - 8340 Case 995 4240

Hi does anyone recognise and know what make this subsoiler is, i need to order some parts, sold by Murley agricultural supplies

For cattle and some livestock owners it should be easy enough to check a cph, just the others not so easy unless they are members of checs, red tractor or other accreditation groups or pedigree societies and have agreed to have their data on the online database.

It was fitted to a 674, so should be a 239 but the code is very different to the original code which is stamped 239.

Can you telL me what engine code DT2D315173* Is for please

A 7610 rad would be good here, I have one that was bought new for my 7610, never used, bought from Andrew Symons new holland dealer last year, then the 7810 came up and the 76 got part exd before I had chance to fit the new rad.