Search results

  1. Arthur Living

    Massey Ferguson 30 drill

    Wanted, Massey Ferguson 30 3 metre disc drill. In good working order, small seeds rollers required, plus a bridge link if possible. Near to Cambridge if possible. Many thanks.
  2. Arthur Living

    Breaker ring Cambridge rolls

    Hi all, I'm thinking of going all modern and replacing my old gang rolls with a set of folding rolls. It seems that quite a lot of secondhand sets have breaker rings on them. I've never had any experience of using them and was wondering what the advantages and disadvantages are. We have very...
  3. Arthur Living

    Kuhn MDS1121 M3 discs

    I've just bought the above spreader fitted with m5 discs. According to the Kuhn app the m5 is for 24 to 32m spreading. According to the Kuhn app I need a set of M3 discs to spread 18 metres if anyone has any please
  4. Arthur Living

    Mf 30 fine seed rollers.

    Hi, Looking for the above for a 3m drill please
  5. Arthur Living

    John Deere 2140

    This might sound like a daft question and I probably know the answer! My 2140 has been away to have the pump sorted in the back end. Since it came back when it is in low power syncron and you dip the clutch the tractor comes to a halt as if you've applied the brakes, a bit like a Massey 698...
  6. Arthur Living

    Cable size for motor

    Hi there, Tried finding a simple calculator for working out the cable size required for a motor but struggled. I have just bought a 5hp / 3.7kw single phase motor to power a roller mill. It is to be plugged into a 32a blue socket about 10m away. Does anyone know what cable size I need...
  7. Arthur Living

    Power harrow eradicator tines

    Hi there, I run a 3m kuhn / accord power harrow drill combination. I have been considering using different wheel equipment (18.4 x 38 standard) for when I am drilling but cannot really justify the cost, duals will not fit in the width. I use the same tractor for ploughing and drilling...
  8. Arthur Living

    Feeding barley and peas to lambs

    Hi there, For a start I will say I only have 60 odd lambs run alongside arable. I would like to push them on a bit to get some of them away. About a 1/3rd of them are just about there but seem to have been static growth wise since the weather turned. The other 2/3rds I am happy to run long...
  9. Arthur Living

    Spalding to Cambridge

    Knight trailed sprayer complete with an extra set of wheels. Tia
  10. Arthur Living

    Ford 4000 stop cable

    The stop cable has snapped on my 4000. When looking for a new cable I find there are two different lengths. Is there an easy way to find out which one you need? My tractor is one of the very last with a rotary pump.
  11. Arthur Living

    Overseeding of ley

    I sowed a rye grass / timothy / clover short term ley on a block of land five years ago. It was originally my intention to use the grass for a couple of years and then return to arable but the situation has changed. As mentioned it has been down for 5 years now and consecutive dry springs...
  12. Arthur Living

    Sanderson Brakes

    Have an old Sanderson 6-22 Teleporter2. I was pushing up the muck heap earlier and when trying to hold the machine the brake pedal isn't solid, it creeps slowly to the floor. The reservoirs levels do not seem to be going down. Is it the master cylinder seals?
  13. Arthur Living

    956XL Rear axle seal

    Hi there, Was using my 956 today and I noticed the smell of gear oil. Climbed out to have a look and found the rear rim covered in oil. The axle seal has obviously gone but what looks to be a steel ring on around the axle end is also torn and pushed outwards. Is it just the seal gone or has...
  14. Arthur Living

    Accord suffolk coulter tips

    Have a number of these to change on my drill. I have the new tips and rivets, attempted to change one and was wondering what is the best way? Has anyone ever bolted them on rather than riveting?
  15. Arthur Living

    Linseed and axial flow combines

    Between flea beetles and other issues I am running out of break crop options. I am considering linseed but are older axial flows able to cope with it?
  16. Arthur Living

    Bale Wrapper virgin

    Hi there, Being a soft southerner I usually make hay for our livestock but this year looks like it is going to be rather challenging! I am a one man band and my hay ground is spread over quite a distance and was wondering about making some into silage / haylage for the cattle. I have never...
  17. Arthur Living

    Explorer Spring Barley

    Have tentatively signed up to grow this next year. Anyone tried it and how did they get on?
  18. Arthur Living

    Kerb. Anyone started?

    Have some big blackgrass in my OSR. Have the Kerb ready to go but is it too early with all this mild weather. Has anyone else had a go yet?
  19. Arthur Living

    So autumn IPU is back

    Do people think it will make a difference with blackgrass? Never did a full job, they are not claiming so this time, but blackgass is certainly worse since it disappeared.
  20. Arthur Living

    John Deere 540 baler

    I think I have used up all the good will of friends and family moving little bales. Been offered more hay land and thinking of buying a round baler. Back in the day spent many, many weeks baling everything going with a JD 550 which I learned inside out. Have not had any experience of a 540...
Top