We are wanting to concrete our shed that's Just been put up,
Before we got the shed built we had to dig into a hill and then we had bring the level of the bottom of the hill up so that the shed could be built on,
The bottom half of the shed we have used topsoil/subsoil/ and some of the hill...
So if the Bateson doesent rattle we would happily go for an bateson, Just thinking if ir would be any good with lynch clips etc,
The delivery time doesn't matter as long as it's nothing over 1 year Just wanting to get one ordered Ideally,
@grainboy we have seen the hook holes in the side rails...
Thank you for you're responses, we've narrowed ir down to Brian James or Bateson
The Bateson costs less,
I rather the look of the Bateson,
But with Brian James their Sides are tensioned so that would reduce any rattling noise etc....
Bateson use Lynch clips,
Are batesons noisy on the road...
We'll be using the trailer like an multi use trailer so will be hauling heavy now and then,
Graham Edwards was the trailer I wanted as I've heard only good about them but like I said we need the trailer to have the metal sides on the floor for towing vehicles etc,
Ideally looking for the best...
We want to get an new flatbed trailer, and we are currently looking at what options there are, really do like the Bateson PT56 16ft X 7ft Tri axle Trailer, has anyone had any experience with an bateson flatbed?
How do they compare to Nugent, Brian James etc?
What are the pros and cons of these...
2022 Shipping container buisness,
We are thinking of setting up an shipping container buisness on our land....
The land we are thinking's right near the road (B Road) and 1 mile away from an (A Road)
The fields currently empty and Just used for grazing, there's only 1 house that could complain...
We have got an Thwaites All Drive 6000 5 Ton Dumper 1999,
We were using the dumper the other day and realised that oil was going everywhere on the floor underneath so we stopped straight away,
After inspecting we've realised it's coming from the Transmission oil filter housing (Seals gone)...
We have seen an few acres near our fields the next farm down from ours owns them but he doesn't farm,
We would like to buy them off him but we aren't sure what the best way of asking would be,
Does anyone know where to find out what fields that farm owns? We know that the farm sold alot of...
Yeahh that's the price and it's not large only 12M X 18M Machinery Shed the Insulated sheets are about 3 times more expensive per Meter, so definitely much more,
We think that ir would be better to Just over clad Ideally as and when
And the Z Perlins are only £200 extra so we are going with...
We are trying to decide who would be best to go with,
Looking at the quotes it's Fowler and Gilbert we are thinking about, has anyone got any experience with them? Do they price match?
We have an price from SJB Steel aswell which they Supply/Deliver/Erect for an very good price, anyone had an...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.