Search results

Hi I'm just trying to get mrtk working on our starfire 6000 and before setting up our own base I want to know it's all working on someone elses. So does anyoke know of a RTK2GO or centipede base which works with johndeere. I've tried connecting to a few of them but the best I get is the orange...

I'm after some help getting my Trimble agGPS 542 RTK transmitter to send NTRIP RTCM messages through a 4G modem to SNIP/RTK2GO so we can use this off of our John Deere 4G RTK modem to use our own current trimble mast to run our John Deere tractors. We where using LH Agro to set this up and run...

We have a 6175r which in chopped straw and chaffy environments blocks the radiator screens and then begins to overheat. It does it quite often, up to 2/3 times a day when ploughing. Are these screens essential? We have fendt & New Holland equivalents without these and they never have an issue...

Anyone know any tricks for ploughing headlands out from the edge to the middle of the field neatly? Currently on the final run I just lift up the rear furrow slightly with a hydraulic top link - to reduce the final furrow depth, this isn't ideal of course though as then not all the ploughing is...

We have a 2019 6175r with fully activated jdlink and everything is set up properly, however if i make a AB line or boundary in operations center it doesnt automatically send it to my tractor... am i missing something or does it not work like this - do i need to do something else? On the tractor...

Title says it all, any ideas? I'm thinking it could be low on hub oil?

Just got a new plough, a Lemken Jewel 8, it does a lovely job however on particularly trashy, stoney or wooly land when turning over the plough, stones and dirt gets stuck in the wheel mechanism and stops it moving. I just thought I'd share these plates I made which prevents the trashing getting...

I'm sure it's been said on here before and at every Lamma/cereals event we bring it up to JD and whoever is there representing trimble, but does anyone know anything about if JD and Trimble might use the same RTK wavelength/frequence (whatever it is) in the future? We have a RTK basestation we...

We've got a 2014 th407c which the transmission seems to overheat very easily, looked around at forums and it seems a reasonably common issue, they recommend getting a mechanic to fit an expansion tank for the trans fluid and and extra external oil cooler for it, any body know 1) how I could do...

We've got a 2019 6175r with the 4600 display and premium radio. 2 or 3 times a day during use the Bluetooth disconnects and it switches back to the radio, it doesn't say 'bluetooth disconnected' it just jumps over to the radio and won't automatically reconnect as if it briefly loses power?? I...