Search results

  1. A

    MF675-4 - weak PTO

    Hello. I've got a MF675(-4WD), and attached a winch to it last week to pull out som timber of the woods. The problem was that even with high rpm the PTO didnt have the power to do almost anything. The power transmission axle stopped rotating, so it was clearly the PTO that was the problem, not...
  2. A

    MF675 - front axle leaking oil

    Hello. I was changing the oil on the front axle yesterday. I drained all the old oil out according to the workshop manual. Then I filled on the axle with 4,5l, and after that 1,6l on the right wheel, and last starting to fill on the left wheel. After filling about 0,5l i noticed it startet...
  3. A

    MF675 - 4WD issue

    Hello. I've just got this 1984 model MF675, with 4wd. Looking at the usermanual, there should be a button on the right side of the wheel to activate the frontwheels (see attached picture). Mine doesnt have this, so my question is if anybody know where the wiring of this disappeared solenoid...
  4. A

    Oilpressure - Mf135

    My 135 runs with a bit high oilpressure (I think?). I've changed both the oilpressure-pipes and the gauge, so I dont think it's showing me the wrong pressure. Any comments on if this is to high when running under normal conditions with abit load? And if so, what could be the cause of it? (it's...
  5. A

    Mysterios 3point on MF135

    Hello. Long story short, i wanted to hook up a Dalen 1252e (wood splitter) to my MF135. I placed a 3/8 for free return of the oil (no 3 on the picture), and moved the pipe (ment for trailer tip?) over to the selectorvalve (from no 2 to no 1). Usually, my 3point is working when the selector is...
  6. A

    Grey engineoil on MF135

    Hello, and pardon my bad english (Norwegian guy here). I have a MF135 (1970), which I changed engine oil 2months ago and it havent been used much since then. Today I checked the oil level, and I noticed that the oil on the dipstick was all grey. It hasnt used any cooling fluid, so my question...
Top