Search results

  1. S

    2005 Manitou mlt 627 t

    Hi, I’m having a problem with my manitou, basically all hydraulic functions work perfectly however if the steering wheel isn’t moved for around 10-20 seconds, all functions stop until the steering wheel is moved again, only a slight movement is needed, there are no warning lights and all...
  2. S

    Machinery workshop tips

    Hi everyone, I am planning on erecting a machinery workshop, and have been doing a lot of research on what will be involved, however it is a difficult subject to find information on. I am hoping some of you can give me a few pointers. It will be a steel rsj construction, so how deep should I...
  3. S

    Mf 6290

    I am working at a 6290 that has a drive fault. The error code for faulty Reed switches in the f/r shuttle lever is on and it will drive in one direction but when you go to change direction, de-clutching or not, it will bring on the orange exclamation mark, beep and either stop driving or stick...
  4. S

    Sanderson GX525

    Hi everyone, my first post on the farming forum but everyone seems very helpful and knowledgeable! I’m hoping someone would have either a wiring diagram or a picture or two of how the fuse box is wired in a Sanderson gx525, bought one recently and someone has the fuse board in bits, I am going...
Top