The one to fit my Gem Emerald is about £250 quid a pop.
So wondering if there is an alternative close to the size that I can manufacture a new cassette for it to fit into if it's not the perfect size.
Genuine one is 425mm x 160mm x 60mm
Anyone got any spare lying in the back of their workshop they want to part with?
2 of mine aren't sealing very well, suspect they have got a bit warped after impact with a boulder...
I think my merlo has a fault in its dashboard. Which results in the dashboard not powering up, and no drive.
Its made by Continental Automotive. Is it likely to be made solely for Merlo, or is there a chance it's the same as another machine, perhaps with a lower spare part price...?
I'm looking for a Pacer pump with electric motor for filling my sprayer with liquid fertilizer, but a bit bewildered by the pump numbering.
Can anyone recommend one?
415v
500 to 750 lpm.
I have a Kubota engined 32.6.
Suddenly lost all lights and power on the dashboard, aswel as forward and reverse drive, and revs.
Hydraulics work fine.
Gear selector works - can hear it moving
Everything else electrical works - lights etc.
Given all the plugs on the fuseboard a wiggle, out and...
I have a space above a gable end entrance to my indoor silage pit. 7.2m wide by about 3m high.
Are there any off the shelf options for a weather break screen that would allow frequent access?
Galebreaker agridoor would be perfect, but they just go to 6m wide.
I seem to have an increasing number of power cables attaching directly to the battery of my T6. So much so, it's getting quite a mess in there and it's a pain when the battery needs out, or 1 cable needs to come off.
Has anyone fitted a separate power bus bar for wiring accessories to? Or...
Keeps going upwards regardless of what I do. Ends up rock solid with my head at the roof.
What might he wrong?
This potentiometer at the front has a broken bracket - ?
While I wait for a replacement genuine ignition switch from Germany, thought I'd see if I can budge a replacement with this Lucas for my dominator.
Which wire goes where?
I have 2 heater wires
1 perm 12v
1 starter wire I presume
And a wire from the hydro safety switch.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.