Search results

If the paint is cheap it’s cheap for a reason. Low anti corrosion properties and low grade pigments that will fade. Low levels of preparation will accelerate the coating’s failure. It is what it is. CROMADEX offer very good paint systems plus single coat primer top coat products too. Delivery...

Thanks for the replies. I have taken everything off and all the bolts out. The adjustment was seized. Once freed off or replaced it looks like they will go long enough. (Yes the shiny bolt was a bodge that I will sort out 👍)

Just taken it all off and the levelling arm and the lazy arm rod are seized. looks like they can be extended but won't budge. I will heat them up and see if they will undo/extend if not I will treat the old girl to two new rods, unless anyone knows a good secondhand spares dealer?

Hi everyone, I hope you are all well? I laid my old tractor up due to engine issues which I have now resolved. I am still at a loss as to why the linkage won't lower enough. If I lower everything the top arms with the power don't seem to go down enough as per the enclosed picture/reply. If...

Let me try this, thank you. I fear my arms are bent and need replacing :-(

This is as low as they will go is this normal?

Is there an inspection hole. The arms go fully up but don't seem to lower enough :-(

Thanks everyone, i am using the correct lever :) I just wondered if the draught made any difference but it doesn't. I have moved the pins around, don't make much difference to be honest. The telescopic arms seem to extend to the full length. i will try and take a picture and post as a picture...

Hi everyone, I wonder if you can help me. My International doesn't lower the rear 3 point that low, I have to put everything on blocks to get them on and off. How low should they go. I have tried it with the draft down etc etc How far off the ground should they get too? Thanks in advanced

He is coming back next week to do a couple more paddocks. I will try and find out but I am not sure he will tell me.

Unfortunately he hasn't got one, but thank you (y)

We were told two weeks which we will do. They did say top it after a week though. hhhmmm.

Good to know, thank you.

I have a small John Deere we use for odd jobs. The engine has dropped a piston. Does anyone know any breakers they know. Its a Yanmar 3 cylinder diesel 3NTV88. John Deere 3320. Cheers.

Had them sprayed last week. All dying now. Will top the fields in a few days. Will do them again next year until they are gone. As with things like this the next door fields have them too but he won't spray his, so i guess I will always have them to some degree.

Thanks for the replies, very helpful 👍

Excuse me if this is a silly question; but this year our grazing land for horses is absolutely covered in buttercups. Do they stop grass growing? If I topped the unused paddocks would it help in any way? All thoughts and advice is appreciated.(y)

Don't do FB.............

My understanding of Class Q and have done two is that the buildings need to have been redundant for over 10 years and not in use. Class Q will not get you full PP until the building is converted to residential then you might be able to knock it down and build a new build. I had this which is...

I see some people Harrow when grass is at seed point. Not sure if it makes any difference. I don’t bother seems a waste of diesel to me. Yield seems to be constant harrowed or not. happy to hear others views.