Search results

  1. S

    Massey 7618 adblue problem

    Massey 7618 2013. Tractor is using adblue at around double the rate of usual. It has quite an easy life, sprayer etc but noticed the change when it was working harder. Anyone experienced this? Is there a cheap/easy fix before looking at a delete? Thanks.
  2. S

    JCB forklift tine

    Managed to bend a tine 🙄😂 Does anyone know of one of these on the shelf or if there is such a thing as non genuine? They can only be bought as a pair from the dealer. Thank you.
  3. S

    Massey Autosteer problem.

    2016 7720 steer ready with an aftermarket Agleader Incommand on RTK. The tractor is sitting approx 25cmm off the line always to the right. The problem was intermittent. I had this before and the problem was with the tractor rather than the Agleader system. Problem sorted out by dealer at that...
  4. S

    RDS Spraymaster 200

    Does anyone know what the Speed Cal Factor should be approximately when taking a speed signal from a MF 7618 2013 tractor? Thank you.
  5. S

    MF 7 pin plug help

    Does anyone know what the various pins relate to on the plug? In a Massey 7618. Looking for speed signal and earth. Thank you.
  6. S

    Bolt id

    Is anyone able to help me identy/find the equivalent bolt? It's M12, 21mm head, 50mm of thread (all the way) approx. Thank you.
  7. S

    Roof sheets

    Replacing a roof on an old shed. What is generally cheaper? The cement fibre type sheets or the modern profile type sheets? What are the modern ones made out of? Do they provide the same insulation? Any general comments/advice welcome. Thanks.
  8. S

    Vaderstad Rapid 3m box drill price

    Anyone know a ball park figure for a new one? Thanks.
  9. S

    Horsch Sprinter 3 metre.

    I realise this is quite a rare machine. Thanks.
  10. S

    Grain store monitoring equipment/advice

    Could anyone recommend someone or a company that could provide the above mentioned? Impartially. Thanks.
  11. S

    Horsch Sprinter

    What are the pros and cons of this machine? Thanks.
  12. S

    Auger

    Does anyone know where I could get a 6 metre by 16cm auger off the shelf? Anyone had a price/know a rough price? Thank you.
  13. S

    Tyre vulcanise.

    Is anyone able to tell me if this is repairable? Or who to contact for vulcanising? It's a 800/65r32 Michelin MegaXbib. It is off a combine. My idea is to use it on a trailed sprayer if it is repairable. Thanks.
  14. S

    Tyre vulcanise.

    Is anyone able to tell me if this is repairable? Or who to contact for vulcanising? It's a 800/65r32 Michelin MegaXbib. It is off a combine. My idea is to use it on a trailed sprayer if it is repairable. Thanks.
  15. S

    Tractor tyres/wheels

    Looking for two tyres. 420/85r30 which is the same as 16.9r30. Potentially looking for the wheels too. 30" by 15". To fit Massey or Fendt 10 stud 180-200hp front axle. 25-50mm approx offset. Thanks very much.
  16. S

    Wheels and tyres for MF 7720

    On the hunt for a set. 480/80r46 and fronts. For a DYNAVT. Would consider fendt red. Does anyone know of any? Thanks very much.
  17. S

    MF DynaVT independent brakes

    Does anyone know if there is a setting for the independent brakes on a Massey DynaVT so that the drive does not disconnect when using them? And if so where do you go to change it? A 2013 7618 and a 2016 7720. Thanks.
  18. S

    Quality Barley straw for sale.

    When will the market for this top out? Pre harvest? Where is the best place to sell? Ex central Scotland. Thanks.
  19. S

    Maris Piper Potato Seed for sale.

    https://thefarmingforum.co.uk/index.php?threads/maris-piper-potato-seed-for-sale.218372/
  20. S

    Maris Piper Potato Seed for sale.

    https://m.facebook.com/story.php?story_fbid=10156071433028467&id=504768466
Top