Yeah like texelburger said it's really good for hooking up implements.
I liked how you could roll off the pedal and ride the brakes in the last few inches(split braking if need be too), seemed more intuitive especially for a cvt newb like me.
Well team, pulled the trigger on a new m7172 kvt. Really really impressed, great machine. I was genuinely surprised how capable it was. It's a really solid machine that's actually got a fair bit of weight to it, I've got a 20m3 silage wagon that's 4.5t empty and it'll be felt on the back of most...
Managed a drive in a KVT 172 today. They are a solidly built good bit of kit that's for sure. What are they like to keep clean underneath? Specifically the right side. There is a hell of a lot of exposed lines and crevices for mud to live!
Anyone compared them to a deutz 6165 ttv or had...
Howdy chaps, as the title alludes to I'm looking a purchase a new tractor and the Kubota has caught my interest. I've read a great many threads on here already but was wondering if someone who had had experience with these could answer some questions I had.
I only run the one tractor in my...
OK a solution to this today incase it happens to someone else.
The radar pin solved the problem, my theoretical speed pin just would not work.
It's super frustrating because I tested this albeit with sh!t wiring obviously 🤦♂️
The radar was outputting a strong Voltage signal the gear speed...
I'm from NZ so it takes a bit to compute the different metrics haha.
The lower mileage 3.2 would be my pick. At the rate you use it you could own it 4 years to be the same as the biturbo miles. And there's bugger all difference between px2 and px3 rangers that makes them that much more desirable...
There's no differing setting in the amazone box for radar/theoretical, I know what you mean on the Kuhn setup.
Luckily you can set a virtual speed with this spreader so I was actually able to use it, but my speed vary alot when spreading!
I'm using theoretical speed.
I just tested Hz across pin 2 and 7, it's the same with 1 to 7 too.
I don't have an osiliscope, is there another thing I could test?
Howdy team, I have a niggly little problem that I can't seem to figure out.
I bought a used amazone fertiliser spreader with the amados spread rate control which requires a tractor speed input to work.
I get the correct cable and plug it in and I get no 'pulses' registered.
I get the amazone...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.