Search results

Thanks, Are your Flexi pipes 125mm mine are 140mm.bought the drill 2nd hand and the previous owner must of used old konskilde grain blast fittings, mine are 30 degree and fairly helps with blowing round and along the side pipes.

Thanks there, I never thought of using flexiseals so will look into it 👍.

Looking well all fitted up💪, unless the weather improves dramatically you'll not get out in the fields for a bit. Can I pick your brain as I'm in the hunt for collar's like you have for going onto the side pipes (like konskilde 140mm) but struggling to find. Mine on my DF2 are falling to bit on...

APM supplies was £56 for a box of 24 Ep2 red

I think I had the fan around 4350rpm on my DF2 blowing seed and fert back, never had any blocked pipes down to lack of wind usually undressed seed or fert lumps getting stuck. What drill are you using?

Hi, I'm sure if I remember u push and hold the button with the 3 lines and then press the tick. You get 3 area totals.👍

I know that the farming industry will all feel or felt the pain of losing a loved one in an accident, but please leave searching for specific details. If only we could turn back the clock we would always be wiser.

So sad, my heart just bleeds for the all family. It emphasises the risks we work with every second on every day and it only takes a second. She'll be such a loss💔💔

If of any interest, I have a 1.8m Flexicoil press for sale that we used with a es80 4 furrow Kverneland for sale. Not sure where your base?

I have a Stewart grain trailer and a couple of Marshall silage carts. Good 2 keep them on their toes ?.

First Broughan but I'm impressed not many up in the north east of scotland, well made and a good paint finish.

New silage cart home, just hope we get some rain soon or we won't have much 2 cart??.

Have an Arion 630cis+ here, replaced a 620cebis, the suspension is far less complicated but I think ride is not quite as smooth as the old one. The tractor is nice and user friendly, a shame you can no longer get fuel usage info unless you set it for a job as you get it on the old cis models...

As Dman says stick some tape over most of it and that will lower the sharpness of the beep, that's what we did with out 526/56 2 keep the peace with neighbours .

Sorry, this is the cable I have with the proxy sensor at one end and the plug which has 3 pins and screws into the input ports connecting too the amatron+ box. I assume the cable is only 3 core. Cheers.

Hi, I'm looking for some help please I'm just fitting up a new to me amazone uf1801 sprayer which has the same speed sensor cable with the proxy sensor. Has anyone cut off the sensor and fitted a 7pin plug for the iso socket in the tractor for the speed info. Local stealer has the cable but I...

2 quiet natural bulls, high health status, Islavale bred 20 and 22 month and ready for some ladies......

Hi billboy1, I also am considering an upgrade and would be interested in the details. Cheers

That's just reminded me that I haven't sorted my drill box yet. I finished the spring and it seemed to have a mind of its own, sometimes the rhythms would change with the marker and other times not. Even more annoying would be it would jump rhythms round to the tramline one on the way down the...

Got a wee while ploughing this afternoon,going far better pulling in-line and bigger front fur. Braveheart the manual is unreadable as it been in the cardboard tube for ages and must of been wet and mouldy mess. Cheers DieselRob the ploughs got a 160 headstock so only one adjust on the ram for...