Syncromess in forward / reverse will give trouble. And shift between high and low range is also a weak point.
The dynashif never gave any trouble on the 8110 and 8150 I had in the past.
You can't. But I have created ab curves for all the headlands on my fields. Imo it works better than the auto create form boundery on the newer once.
The good thing with using the ab curves is you can pause the recording if you have straight sections on the headlands, then the line will be...
Will try that tomorrow, however it has plenty of oil and power on the scv.
The Oli is in the middle of the sight glass and I changed it when I purchased the tractor. The oil is UTTO GL 4, 80W
standard JDM J20C + D
Yes I am pretty sure it's the oile temperature, it shows the same in the small display on the side panel.
All the coolers in the front is clean, washed out with water. And the fan seems to run quite ok. When you stop and level the engine running, you can feel that it's sucking air though the...
My recently purchased John Deere 7920 shows high temperature for the transmission olie when doing road work with heavy loads. Yesterday when moving some grain with my hook lift trailer ( 35 tons total weight) it showed +80 ' c.
this is my first autopower tractor so haven't got a clue if it's...
Update on the Aurock drilling. looks good on the light and medium soil. But on the heavy clay it had trouble closing the slot. We should probably have raked at an angel before rolling to help it a little bit.
Our own Sprinter had no trouble close it.
Kuhn on medium soil
Clay
Horsch...
If you are a few behind it sometimes helps to install the software after the one you have now and then the next one etc.
Our maby it's just the latest version on stellarsupport not working properly, I have the August/september one in now and mine don't want to install the March version either...
This thread is manly just for information, but it would be great to hear comments and opinions on the machine.
During the last days of our spring barley drilling an old friend now working at the Danish Kuhn import called me and asked if I was interested in trying their new model of a No till...
I have Blaupunkt Barcelona radio's in both my 6939, 7530 and 7920 they are fitted with a long flexible microphone.
Work well both, hands free phone, radio and Bluetooth streaming music.
Better than most i had previously.
the weight to hp rotation is just as important as hp. 45-50 kg / HP
We have had a MF 8110 in the old days, it's did struggle. Now I have a a JD 6930, 205 hp / 7500 kg, pulls it really well but a 1000 kg extra for grip wouldn't do any harm.
Bredal B2 (or b4-b6 if you want a trailer model)
Cheap, very accurate, simple and reliable.
We bought our B2 fifteen years ago for like 3500 £.
We can spread 30 -35 tons of fert on a 8 hours day
Think Clive was the first to pimp drills on here [emoji6]
But my old CO was probably one of the first. If it wasn't because of the lack of tine pressure it would still be here.
I'm we are still keeping the old 7530 alive. After a set of new ceramic injectiors and a little more of adjustment.
PS the numbers are in KW without boost
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.