Search results

  1. paul mcerlean

    Ford 10 series stopper

    Hi, would anyone have a picture or parts diagram for the connection of the stopper cable to the engine. I can’t seem to source the part that the end of the cable attaches to. It is a series 2, 7610. Thanks in advance
  2. paul mcerlean

    Ford Super Q Cab roof removal

    All, I am trying to remove the roof on this (7961 Series 2), I am aware of the bolts on the top and hinged, how many bolts are there? Also any recommendations for the workshop manual for this as I will be doing a few bits to tidy up! Thanks
  3. paul mcerlean

    Grammer msg20 seat

    As I said, no idea what’s it’s worth so open to any sort of offer, thought it was to good to throw in skip,it might be of use to someone.
  4. paul mcerlean

    Grammer msg20 seat

    Grammer msg20 seat, not air operated Not sure of the price was thinking around £120? open to offers Suit forklift, digger, tractor Can put on a pallet Thanks
  5. paul mcerlean

    Hydraulic Fittings - metric L or S

    Hi all, I have to replace a couple of hoses, want to order on line. The machine is all metric, however, I don't if they are the light or heavy types? Is there an easy way of telling? I noticed one of the hoses is 1/4, the spanner size was 17mm which is leading me towards the L.
  6. paul mcerlean

    Merlo 32.6 locking pin

    Eventually got it split down. It all appears to be in good order. The pin doesn’t seem bent and the spring is ok. I am wondering did something move and the groove/slot moved from where the oil pipe was connected? Going to reassemble and see if it works
  7. paul mcerlean

    Merlo 32.6 locking pin

    Hi all, any suggestions on removing the 19mm bolt that holds in the pin, I can’t get the nut lose, the pin just rotates even in a vice?
  8. paul mcerlean

    Merlo 32.6 locking pin

    Hi the locking pin on a merlo is not springing back and have checked Hydraulics which are ok. Which leave a dodgy spring or a bent pin. I have taken the whole in out and taken the large nut off at the top but not sure how to get the pin and spring out. What holds the pin in? Thanks
  9. paul mcerlean

    Watercourse cleaning

    Just ditching bucket
  10. paul mcerlean

    Watercourse cleaning

    Looking some insight into how many meters a reasonable driver and a machine can clean out per hour/per day, to clean out a watercourse. Have a lot to do and not sure how long/ how much it will cost me. Thanks
  11. paul mcerlean

    Mobile tractor mechanic NI

    I am based just outside Randalstown , Co Antrim
  12. paul mcerlean

    Mobile tractor mechanic NI

    MF and Merlo, MF is a 6180 mid 90’s. Merlo is 32.6 2014 It’s more servicing and maintenance work but there is the odd repair [emoji85]
  13. paul mcerlean

    Mobile tractor mechanic NI

    Hi can anyone recommend a mobile mechanic in NI?
  14. paul mcerlean

    convert Pan mixer to electric

    I have a pro driven pan mixer about 850l or so. I was wondering about using an electric motor to drive ( have 3ph) and not sure the size and type of motor to run it? Any help would be appreciated Thanks in advance
  15. paul mcerlean

    Mf6180 - more issues!

    Still can’t get this back on the road. Split the tractor, all looks good. Checked all sensors, again all seems to be ok. The valve block where you bleed at was full of dirty and have that all clean along with new filters,etc. I now have a good clutch but still won’t go into gear. Pulling hair out!
  16. paul mcerlean

    Mf6180 - more issues!

    I have replaced the seals in the clutch master cylinder, they were past their best and seems like I cant get it bled properly. Then randomly it decided not to start at all, dash lights up, wires all connected just wont turn the starter. At that point i closed the door. I'm assuming it a fuse...
  17. paul mcerlean

    Mf6180 - more issues!

    Yes it was working that’s what makes it funny. I assume it a split
  18. paul mcerlean

    Mf6180 - more issues!

    Yes that is the plan, but I need it going!
  19. paul mcerlean

    Mf6180 - more issues!

    Hi folks, having had a couple of guys out to look at this problem, no one can seem to find an electrical fault. One man is adamant that it is mechanical! The clutch pedal has resistance and i bled it again. It will go Into the forward/ back easily but once you try to put it into gear the tractor...
  20. paul mcerlean

    Silver jubilee

    A quick question, does all silver jubilees log book refer to them as silver or blue? How can you tell if genuine, or who could you contact Thanks
Top