Search results

where were they in the video, i didnt notice

Another option would be replace the hydraulic ram with a linear actuator and have a current limiter in the circuit prevent the actuator burning itself out.

I agree with your post eventually drop is fine by me, if they stay up for 10mins i will be satisfied. With the way i have it rigged up I have constant pump engagged and I can pulse spool valve 1 and the lift will lift up. Spool Valve 2 opens and closes fert spreader. If it drys up a bit I...

have a read here https://thefarmingforum.co.uk/index.php?threads/mf-100-series-hydraulic-pump.402683/ cant tell you how the 168 performs with its new piston rings in the lift cylinder, its been too wet to get into a field with the fert spreader.

do they drop when locked out with the 3 way valve

whats going on there

sometimes the spool lever on our JD6420 gets a bit sticky, it goes into all 3 positions no issue, however it can take a good shake sometimes to bring it back to neutral. after a bit of research i found this thread and i guess i need a bit of lubrication on those detent balls in the spool...

does it have multipower

As per title is there any way to do this easily and without making a mess. Will be spreading a good bit of urea this year as opposed to blends, urea has more nitrogen in it so I think this situation will arise. Would like to be prepared

did you manage to fix your issue

i went for a drive in car yesterday evening 50mile trip. Said I would test out AgOpenGps in RTK mode as i went as i have travelled the road before with Agopen in RTK mode running. thus i had the route recorded. travelling at 80-100km/hr. RTK seemed quite accurate (<1ft) with the base station...

got one of those helper chargers today same as in this photo, however it doesn't seem to be charging my fz-g1, the LED on the cigarette lighter is lighing up...

that was good going, what had you to remove

what bull is that

have a look at the kilsunny herd for british fresian https://www.facebook.com/kilsunny

no neighbours or TFF readers even with a similar machine who can examine the block for a part number

there is a hole in the aluminimum block itself is the problem statement rather than a leak where a hose/valve/fitting connects ?

what does that block do

Interesting Rauch is German, is it metric is usually supplied on new machinery on the continent

Mine only 6mm hose per the marking on the hose rather than 1/4, rated to 400 bar, think it's a 17 or 19mm spanner I used to remove hose. Open close on Rauch fertilizer spreader which I need to convert from four hose to two hoses and incorporate a 3 way valve so I can shut off 1 disc when going...