Search results

I think removing planet gears will be easiest

Good point about 4wd being engaged. However it’s across farmland. Is there a 4wd clutch fuse ?

I need to recover it 6 miles if I took the 3 planet gears out of each epicyclic hub - it would be fine to drive as half shafts wouldn’t turn ? Would I even need to replace the hub covers and fill with oil again as nothing would be rotating ?

a big job ? Just been looking in YouTube but to no avail

Surely it will need dropping and pulling forward to access shaft ?

Have another T7 stripped its splines on the hydraulic arms cross shaft. One of those days

Guess it’s an axle off job ? Hopefully bearing in front of gearbox on output shaft is ok.

Have a T7050 and it has suddenly developed a loud knocking noise below the flywheel that frequency is proportional to ground speed Its seems to be the driveshaft to the front axle immediately where it comes out the front of the gearbox anyone have a exploded diagram of this area. Any...

I’ve seen this advertised quite a bit. I get it’s a tractor for stationary pto use only, however I just can’t see why someone would go to the bother to make a drawbar for it and take the front axle off. I wonder why it was done - as it’s turned a very useful machine into something that only...

Peter Todd Footsfitter is from Hants. Southern Counties liming is a different organisation some 50 miles away in West Sussex

Does it expand out on its own ?

I have a hydraulic rear wheel dolly. It is obviously made in China and imported into the UK various companies, such as Malpas/Sparex. The ram has packed up, so under pressure it weeps allowing the ram to expand and the wheel fall to the ground. Anyone had any experience in repairing them? I am...

I have seen there’s burrows out the back. I’m thinking phostoxin down these burrows as I used to do in years gone by. I don’t think it’s easy to get hold of now ?

Trouble is there is 1200t of wheat available to them. We’ve tried blocking all holes to outside many tines. I think they are living inside in the cavities etc

Had thought of those but that’s last resort. I was thinking of something that may put them off living in the cavities etc

I’ve a recent new farm which includes some very 1970s grain stores The trouble is they are a hive for rats. I can’t shoot them as any stray pellet will likely end up in the grain and have tried everything from poison to trapping to blocking every hole - all to no avail There are lots of...

Im in West Sussex, yes, of course it can be hauled, however that comes at a price.. I wonder what demand for this season's maize will be come February?

What is maize off the field worth now? I'm in an area where there isnt a local market for it and lots of haulage is generally involved Or am I better keeping it clamping it and hopefully selling it in the new year I imagine theres quite a bit of maize around this year, with the rain etc ?

Thanks. We just checking both.

I have the aforementioned drill with radar and can’t get the hydraulic motor to meter seed It calibrates correctly using the electric buttons under the tank ie the seed mechanism hydraulic motor operates Once it is calibrated the machine is dropped into the ground but the seed mechanism...