Search results

Looking at upgrading from our current Keenan 140 to a twin tub and want to beable to feed all the milkers in one batch approx 170 cows. So think we’re looking around the 21 cube mark. Will have to be a second hand machine ideally that’s been refurbed. Any makes in particular to look at or to...

We’re looking into booking our holiday in early June next year and are unsure where to go currently fancy Switzerland no idea why any idea from folk who have been what to do where to go?

Got the trailer brakes always pressurised for some reason. As soon as you start it the brakes come on knock it off and they release any simple fox for this?

So looking to change to a self propelled from our lely storm possibly next year not sure what to upgrade to has a glance at a 492 850 jag and think something like that may be reasonable as can be got for around 35k. Know nothing about them but am good with spanner’s and can figure stuff out and...

T H Whites are hosting an open day with Delaval vms robots on 27th of this month if anybody is interested. https://www.delaval.com/en-gb/learn/events/open-farm-jeynes-family/

Anybody know of any hedge laying grants about that aren’t stewardship as we’re not in any stewardship got about 160m of old hedge that needs laying and about 80m of new hedge planted about 10 years ago that also needs laying

Anybody have a colour code for an ece green trailer

We’ve planted approx 40ac new seed back in September and all has a lot of chick weed in it any solutions to remove the chick weed and save what grass we have left

Anybody know where I can get hold of them please they’ve been taken off the lely website now so have no access to part numbers

Looking for a looked after 6930 premium budget of around £35k must be 50k with air brakes. Ideally auto power but auto quad would be fine. Not to bothered on tyre condition of price reflects condition. Ideally front link and pto. Would also consider a 6830 same spec

So having just bought a storm that has been written off and partly dismantled I’m looking for a few bits, have spoke to cowkings and waiting on prices from them. Main thing I need is the end of the spout the piece which can fold down with the two section flap. Also needing blower paddles and...

Going to look at a mex 6 tomorrow and the metal detector doesn’t work not sure why but thought I’d ask of any common reasons why it may have stopped working

Looking to put our feed rail up on our new shed and wondering if there’s an ideal height. Cows are big Holsteins have a 600mm tall x 150mm concrete panel feed fence and feed passage is 150mm higher than cow passage. We have 100mm spacers for the rail but not sure if we need them as we’re fixing...

So as time is getting nearer and our new cubicle shed is going to be in use this winter we’re looking at options for bedding. We’re putting in teemore mattresses and are considering envirobed but would appreciate some feedback on anybody doing so. Also a rough idea how much it costs per day per...

We’re looking into getting our own spfh as our contractor bill is through the roof and not getting what we want from them. Want an old machine 4wd with a metal detector. We’re John Deere people but been told to go down the claas route. Wanting something for around £20-£25k to make a start with a...

Anybody had a new one recently? Looking for one for my 6810 as mine is worn out and very sloppy. So considering replacing with new

Looking for recommendations for resin wall and floor coatings to do our new robot room and dairy. Based tewkesbury Gloucestershire. New build being built now.

My 68 reads on the warm side during normal duties and will creep up towards the red when pulling hard. Can’t figure it out. It’s had a new viscous coupling when I bought it last year and I’ve just put a pair of thermostats in it. I’ve not ruled out a dodgy temp sender but also don’t think it’s...

Anybody got an idea where dealer would use for ignition live? Have the sockets down r/h door but would prefer a neater job than that

I’m fitting my loader on my 6810 have the rh bracket on and struggling with the lh as fuel tank is slightly in the way can I push the tank back abit to make room for the brackets?