Search results

As the title says tractor dashboard warning lights are not coming on . Everything seems to be working just not a single warning light is illuminating and I wondered if anyone could give me any ideas where to start looking for the problem. Thanks in advance

Normally you press the same button you pressed on the remote control to wrap the bale and it tips it off however you sometimes have to set the control box to the right programme for the type of wrapper being used. You can also make the cycle continuous by jamming up the tip button on the main...

I have a problem with my jd 6310 and wondered if anyone on here could help me pinpoint it . When you press the brakes and they come on the pedal hisses as normal but when you release them the tractor continues to hiss untill you move a spool valve and then the noise stops . I guess it is still...

Can I ask you what led lights you replaced them with as our bowling green needs to replace our old sodium floodlights .

Done.

Hi kevin My silage kept well in the pit but heated up once in the feed passage if you think your inoculant would help send me on some info

If I had been holidaying in venice and brought home the longest bargepole as a souvenir I still wouldn't touch them with it

Tractor has 6500 hrs on it and is the premium model with the 3 buttons on the gear lever Embarrassingly the oil hasn't actually been drained in 3000hrs but has been topped up regularly because of leaks, burst pipes etc using jd hyguard oil and filters have been changed every few years

I am having problems with my jd6520 clutch and wondered if anyone has had similar symptoms. The clutch may work properly 2 or three times in a row , ie smooth with a nice bite point and then the next gear change and it just bangs in with no real control . I checked the cooling springs...

Hi there I was wondering if anyone purchased a set of these tyres and could comment on them and also what price can you supply them at now @Terry Elsey Tyres thanks

That's the thing , same silage, same barley amount as before

After treating my cattle with ivomec super injection the dung is running out them. Before I treated them they're dung was firm but now the cattle can shxxe across the feed passage . They are on ad lib silage and a couple of kilos of protein balanced barley . What will be causing the...

You looked at my avatar and guessed i loaded from the wrong side didn't you:whistle:

Thanks for all the replies. I am hoping to get a sample taken in the next couple of days so that should give us an idea of dm, sugars etc . The silage was chopped on the 12th and 13th of july which is probably a fortnight later than i would like , it was wilted for no more than 24 hrs and was...

This year I am struggling with my pit silage heating after being put in the feed passage and wondered what might be causing it? The pit was well compacted and the only waste is a small amount on the shoulders .There is no obvious difference on the top of the pit and no heat on the face just...

3 of our neighboring farmers are using jf 1050's with 200 horsepower tractors and as far as I know they are a good match . I would suggest you contact David Cowking , He always has 1050's in stock and there won't be much he doesn't know about them

What will your friend register it as ,a steer or a heifer ?

Thanks for the replies guys. I have managed 60 acres with the chopper fairly trouble free. I replaced some of the most worn blades and sharpened them up until every blade was being touched with the sharpening stone and then moved the drum forward until it just cleared...

The play you are feeling is probably wear between the outside of the bearing and the housing it is held in . I wouldn't worry about it . I sheared the shaft on the bottom roller on the back door and when I fitted the new roller the new bearing would drop straight through the...