Just wanted to know of any of your experiences of a Ford 5000 with a CAV rotary pump instead of a Simms inline pump. What was one with a CAV pump like at starting from cold?
Many thanks.
Just wanted to know if any of you have had any experience Enorossi rakes? Or should I hunt for a second hand Claas Liner.
Enorossi are these:
Similar to the Acrobat.
Many thanks.
As you know this was a common wearing part on them. Do you know if you can still get the gear linkage for a 2640? If so, where from and how much?
Many thanks.
My 590 has just had it's head reconditioned, new piston rings and shells. It has been put back together and won't start.
The engine seems to be tight. The starter just hasn't got enough grunt to swing the engine over fast enough.
I thought, lazy starter. So, I've taken a starter and battery...
Hedge cutters so you don't have to turn your neck so much?
I just wanted to know your thoughts on these?
Sorry, I don't know the proper name for this type of hedge cutters?
I would say that if your using a 100hp tractor it would make it quite unstable? Do I stand corrected?
I have a 35 and a 65 that were restored by their previous owners. The paintwork on them is relatively good however, the wheels where not rubbed down so well as the other metal on the tractors therefore the grey on the wheels has rusted and would benefit from being rubbed down and resprayed. But...
Good evening,
I want to replace the hydraulic coupling on my Massey Ferguson 65 with a modern one. Do any of you know what the thread size is of the pipe that comes out of the tractor? The pipe has a male fitting on the end of it. Many thanks.
I keep having difficulty doing a Massey Ferguson 65 rocker cover gasket. I have put on several new gaskets of the years, but it still keeps on just dripping when the tractor is being used. Does anybody have any tips on how to do one successfully? I have tried using two gaskets on top of each...
Evening all,
Can anybody plough in the David Brown or Ford and Fordson class at the Nationals? Or do you have to qualify? If not, who do you need to get in contact with?
Many thanks.
Good evening everybody,
On my Massey Ferguson 65 the steering box is leaking on the half locking nut on the right hand side. Has anybody had any experience with this in the past? All the gaskets are fine. Should there be an ‘O ring’ or something in between to stop oil from seeping out?
Many thanks.
I am putting net wrap into a RP 202 for the first time. I wanted to know how you pull the net through the rubber rollers. Any tips? I've seen this video several times, but it didn't seem to answer my question. Many thanks.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.