Having developed some play in the seed boot mounting bolt holes of my 750A I have got a Drillfix kit from Shoup. However, there is a problem. The kit is designed for 3/8" bolts but the bolts on my drill are thicker than this (7/16" I think). Obviously the holes in the boot itself are designed...
They have developed a bit of a wobble. The bearings are all ok but seem loose within their housing. Am I correct in thinking that I need to dismantle them all and fit a thin washer or shim next to the bearing?
Wheels: Stocks -
Category: Wheels Manufacturer: Stocks Price: Open to offers Condition: Used
Description:
Stocks 18.4x38 dual wheel rims c/w 4 clamps per wheel.
Superficial rust but otherwise ok.
Images:
See the full size images for this listing on the classifieds by clicking here...
Wheels: Other -
Category: Wheels Manufacturer: Other Price: Open to offers Condition: Used
Description:
38x14-20 mini terra tyres.
5 stud centres.
Tread 20% but otherwise fair condition.
Images:
See the full size images for this listing on the classifieds by clicking here...
Wheels: Other -
Category: Wheels Manufacturer: Other Price: £1000 Condition: Used
Description:
12.4x46 rowcrops. Adjustable centres. Tyres 65%. Good condition.
8 studs, 20mm holes, pcd 200mm, centre 150mm.
They have been on an MF 6480.
The centres have been replaced by professional...
Subsoiler: Flexi - Coil -
Category: Subsoiler Manufacturer: Flexi - Coil Price: £1500 Condition: Used
Description:
Flexi Coil 3 leg subsoiler. Coil roller with cleaning stars. Cat2/3 linkage.
Quick change shearpins. Good metal. Tim Howard type feet.
Images:
See the full size images for...
Rollers: Vaderstad -
Category: Rollers Manufacturer: Vaderstad Price: £1500 Condition: Used
Description:
Vaderstad 6.2m rollers. Breakers. Rings all good. Recent new tyres.
Images:
See the full size images for this listing on the classifieds by clicking here
[SIZE=2]This...
Wheels: Other -
Category: Wheels Manufacturer: Other Price: £2000 Condition: Used
Description:
11.2 x 36 and 13.6 x 48 rowcrop wheels. Welded rims. BKT tyres. Excellent condition. Still have moulding beads on sidewall.
Front 10 stud, 23mm holes, pcd 335mm, centre hole 280mm.
Rear 8...
This has been gathering dust at the back of the shed for many years. I need to get shot of it and it would be a shame to scrap it. Is anyone interested in acquiring it or know of someone who may be interested. Apart from a flat tyre it is in working order.
Harvesting Equipment - Grain drying and handling : Other -
Category: Harvesting Equipment - Grain drying and handling Manufacturer: Other Price: Open to offers Condition: Used
Description:
Lingward wooden grain drying floor. 2 sides 60' x 26'7". Front 6 sections are hardwood. Rear 10...
Harvesting Equipment - Grain drying and handling : Other - Typhoon
Category: Harvesting Equipment - Grain drying and handling Manufacturer: Other Price: £350 Condition: Used
Description:
Typhoon modulating twin gas burners c/w humidity/temp sensor and valves.
Images:
See the full size...
Harvesting Equipment - Grain drying and handling : Other - Bentall RS50
Category: Harvesting Equipment - Grain drying and handling Manufacturer: Other Price: £500 Condition: Used
Description:
Betall 50hp centrifugal fan. 3 phase.
Images:
See the full size images for this listing on the...
Anyone seen these symptoms before:
My s barley has patches of stunted plants in it as shown below. The biggest and worst affected patch is shown in the first pic. Smaller patches like the other pic are more common. Many, but not all, of the smaller patches have healthier plants in the centre...
Anyone have experience with Yetter (or any other) row cleaners on a 750A in UK conditions. I am wondering if they will cope with large quantities of freshly chopped straw in autumn, especially if it is damp.
At our local AICC update day today we had a presentation from Tricet about what they describe as bio-nutrition products. They claim that they produce healthier plants which fight off pests and diseases better and result in yield improvements.
This obviously fits with the principles of...
Following the example of @Clive and others I am going to add molasses to each pass of liquid fert this year.
I am also going to try adding some whenever I do a pass with the sprayer. Graham Sait suggested this when I heard him a few weeks back and the recent Rothamstead work has given me further...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.