Anyone any suggestions on how to stop pipes popping out of the spool valves on the 67/77 masseys. Driving me nuts, new male ends on the implement, have fitted a new coupler etc and still have pipes popping out. Can use it for half a day then it decides to pop out. Sometimes it pops out when you...
Hi, when swapping trailer off an air brake tractor to one using hydraulic brakes ive always just used the shunt valve but read somewhere lately that you should also drain all the air from the tank in the trailer. Which way is the correct way?
Hi, got a leaking lift ram on a new to me
Trima loader. It looks as though someone has been at it but still leaking. When lifting the loader the outer part of the ram seems to push out slightly and then when lowered sucks back in. What could the issue be? I will attach a photo of the end. I...
Hi, i have an old style conor bale wrapper (red/yellow) that after tipping the bale of and starting to wrap another bale, doesn't let go of the wrap fast enough and then snaps it. Before i try ringing conor does anyone have any suggestions. I vaguely remember a procedure which involved taking a...
Hi, got a new to me 2019 jcb agri pro with new style cab. Air con certainly better than the old ones and can de mist the cab etc.When turned all the way onto cold on warmer days its certainly cool but not freezing cold. Can anyone confirm if thats as good as its gets or should it get freezing...
Hi, got a tier 3 6480 with the joystick electric spools. Operate them to tip a trailer etc and they work fine but about a minute later a solenoid on the back end starts clicking and you can see the spools trying to work. I then get the red led on the lock button flashing a code which i think is...
Thought this rig might interest a few on here. The local hero’s cobbled this outfit together. 28ft tri axle on 6 stud axles and floatations, only hydraulic brakes and now bought a fastrac to go on the front. Surley the axles wont be rated for the speed and should have air brakes with abs for...
Hi, looking for a suggestion for a belt with a pouch mainly for staples. Just cant seem to find what i think ime looking for. Doing alot of fencing lately and sick of carrying a bucket. Know theres a few pro fencers on here so hopefully they have a suggestion. Thanks
Heres a few photos of some workshop jobs i did this year that i remembered to take photos of. Should have posted them at the time but forgot. Our homemade grain pusher has always been used with pallet forks but as the farms grown it gets used more and more the pallets forks were becoming a...
Hi, anyone got a sheep trailer from rob astley trailers? Looking at the 7x4 twin axle. Hoping twin axles will help bearings last longer and give a smoother ride. I prefer fold down sides over solid. Any other recommendations? Thanks
Hi, wanting to buy an artic trailer to cut down and was wondering how people have come on with replacing the air bags with the coil springs? How are they lasting, are they stable enough. Hard to look past one for a bale trailer, half the price but full spec axle wise. Thanks
Hello, looking for the best option to replace this size tyre on a bale trailer. Mainly does road work and straw so not bothered about floats just something good for wearing on the road. The above size seems hard to come by now. Was thinking 285/70r19.5 on new rims unless anybody could suggest...
Hi, anyone running a grain trailer on mini super singles? I dont think ive ever saw one but could do with lowering the height of the trailer and they looked the best option also will an 8 stud agri axle handle them? Thanks
Whats best and easiest way to heat the hitch eye for welding? Tack into place and try to heat evenly with oxy acet? Or put in aga for a couple of hours the get it squared on drawbar and get it welded? Thanks
Got an old connor bale wrapper. Its an early one which has the oil pipes running into the spool block in the cab with the turn counter. Hate the fact that theres oil pipes running into cab aswell its a fair old lump to lift up into a cab.All tractors now have atleast 3 spool valves so thinking...
Hello, got a proforge heat treated bucket edge to weld on to a 7ft 6 grain bucket. Going to use the stick welder for the job and was wanting to check rod type. I am under the impression i want to be using 7018 low hydrogen rods for this? Also any other tips? Going to tack weld plenty of bars off...
Hello, got a 2nd hand strimech muck grab on our jcb 541 agri xtra which has the bigger pump fitted. Even by feathering the roller the grab still seems fast and agressive and was looking for any suggestions on a flow valve that would suit the job.Saw them online but lots of variation for flow...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.