Search results

Herbert or similar heavy duty dirt elevator wanted. Home made is ok. Swan neck prefered or straight , only 6 to 8 M length.

Cork to Hereford Tractor to come back

MF 7726 vt wanted. Low hours. Under 2000 hrs 07836243595

3.5 Meter rotavator wanted. Folding or fixed. Good condition. To suit 250 / 300 hp

Silage trailer from Diss IP22 2HG back to Hereford HR1 1SX

16 foot curtain side body. Fork lifts both ends

3 meter or 4 meter folding rotovator wanted. Good condition only , Kuhn prefered.

Main gearbox through shaft / stub shaft. The one out the back of gearbox that would have a pulley on it to drive a fan. Or heavy duty one so could run power Harrow on front linkage. Model Rabe PKE

JCB 3 to 6 ton digger on tracks wanted. Age not too important. Sensible hours. Tidy & well maintained if poss.

Massey 11 reg Fingertip spools , the datatronic ones, have stopped working. The red light is flashing a code which im told is lack or no power going to the spools. They work ok manually by using the small levers on the block. Is there a Fuse ? In the book it says 3 & 4 are fused , but all 4...

Rear Tyre 710 70 42 wanted. Cheaper the better as only needed while one of mine is away being repaired

600 50 22.5 used tyre wanted. With or without rim

Stock feed Potatoes , 100 tons available , cold stored , whole crop , no spurts/shoots £25 ton or negotiable for all of them. Ex farm Hereford.

Stock feed Potatoes , 100 tons available , cold stored , whole crop , no spurts/shoots £25 ton or negotiable for all of them. Ex farm Hereford.

Looking for a Massey , Any model in 2000 range. Or any American made Massey , older one

3 meter power Harrow wanted. Age not important. Good working order for light use. Has to have a through shaft on main gear box as will be front mounted

Folding Rollers with Shatter Boards , aprox 6 or 8 meters wide.

Tyres 600 x 60 30 front tyres , (new) Quotes please.

Massey wanted.With Front linkage preferable. Condition more important than age

Grimme Multisep 2 or 4 shafts wanted , to put new 20mm rollers on them. Does someone have some or know of a breaker machine ? Cant find any at Len Evans or Grimme HQ , only new ones. Have posted in wanted section, but don't think many people look there.