Search results

Anybody got any prices for after cut fertiliser yet? 24.0.15 + S or similar.

We have a H340 on a similar John Deere and it was only 4500 when new! two years old, used every day and still good.

It only takes 30 seconds on our t5 before you can rev it flat out. Think yours must have a fault

The one we got from spaldings is good. The pipe is smaller diameter and lighter than the normal 3/8 hose used on our pressure washer. So it can pull itself down a drain pipe.

The dealer has now put the larger tank on. Them telling us that the handbrake had been left on was rubbish. I think it's because they didn't know what the problem was The speed of the hydraulics is another story in itself. But the answer to that question is no.

we had a new 6115m in march 14. When this tractor was delivered it was low on power as you had experienced. it went in and was put on the dyno and read in the region of 90hp on the pto. Some tweaking was done and was slightly improved. We have an 11ton richard western which it wouldnt tip...

It's not unknown when it's steep, for a bale to roll end over end.

Just to confirm this would be from Malton to j24 m5. Any time in the next two weeks would be fine.

I'm looking to get a Sutton Road brush from North Yorkshire to Taunton somerset. If any one can help pm or ring on 07816083415

I'd be having rib if I was you. Topside is not the best. Any butch would be happy to get rid of that quantity

Spray the edges and corners of the work first and fill the middle in after and Keep the spray gun moving. Have a go, It's only a Massey after all.!!

I wish this was true as the gear stick is a country mile away from the seat. And the buttons on the side is located by a sharp plastic handle. The worst thing about these tractors imo.

Buck bantam and or opinel no.7. Both light weight and hold an edge. Sharpen up on a concrete edge and cut like new.

Was this sold?

We have a Claas 800 with a 3meter pickup. We feel the rake is well matched to the forager. We did use it for the first season in front of a Claas 75 which had a narrow pickup and had no issues. We asked the dealer to plumb a second pipe from the ram so we use a different spool for each side...

We run a class 2700. Leaves a really even swath for the forager and being variable width is a benefit for different quantities of grass to keep the swath the right size. Never had a single issue with it. Krone is a good comparison if you have a dealer near.

150 cows. 350 acres. Do everything ourselves. 100 acres cereals. Maize and grass silage. 160 litres per cow. Need a more efficient brand by the looks of it!

We had a bank of 50 newton rig cubicles with good mats in and the cows would not use them. with a wall in front the cows could not get out of them. Changed to bateman euro with cow comfort mattress and are full up. The mats are available if anyone is interested. We currently have to brisket...

if a 3930 would do the job, then get this one bought. we use one on a yard scraper and love it. http://www.i-bidder.com/en-gb/auction-catalogues/cheffins/catalogue-id-cheffi10148/lot-fa3264e7-52ce-43f8-ab41-a3e3010cf7e2 bristol machinary sale. 26th

Ruger 10/22 .22 rimfire. Shot gun. And .223 cover most of what Is needed.