Our local pop in and have tyre and exhaust renewed, now operates via bookings.
My wife had a puncture, had to book it in for two days later ! Usually you could turn up, wait your turn, but get sorted.
Are all tyre and exhaust places like this now ?
Had a letter informing me I would be paid a visit because I had not attended a course online.
Kept the day and time free, my son took a day off work, because I suggested he might like to attend and see these things (he may take over the farm one day).
Nothing, nobody turned up, no phone call...
Anyone else having problems getting through to this company ?
Ordered Kerosene on 5th October, was told would be delivered by wednesday 20th of October.
Then told due on 22nd and nothing yet.
I am extremely low having just renewed the tank and wanted the minimum to transfer, and did explain...
We are due a second meeting with Landlords agents .
Seem very chatty at the moment, which feels ominous.
Anyone else in discussion with their Landlords regarding a section 12 served Sept 2020 ?
I am trying to change my hammer circuit from single acting to double acting.
Can anyone explain to me how they work ?
It's certainly not like an agricultural 'slice'.
I am trying to find the other side from the current single acting circuit.
Anyone else with sencrop apparatus have to zoom out to see the radar map ?
Since the latest update I always have to zoom out to see any approaching storm, which is a pain, particularly if in a tractor trying to judge when it'll rain again !
Considering one of these with a front tank and would be interested to hear user experiences, but I have a couple of questions.
First question ,
Unfortunately with a front tank I cannot have a quick fit frame, is there plenty of room for fitting, but more importantly, is there room for getting...
Can anyone advise me from their own experience.
I am wishing to use a trimble cfx system with RTK compatability, to control the spray rate and auto shut off at the headlands on my sprayer.
Will the trimble kit just plug in somewhere on the ARAG unit to supply a GPS signal ? Or am I stuck with...
Does anyone know if I can fit the double outlet type of Dutch opener on my Kuhn Megant drill ?
I am not after direct drill pressure, just to spread my seed. (please excuse the pun).
Anyone else get landed with an invoice for decorating the outside of the farmhouse and outbuildings?
Just a figure, no breakdown of work done.
On quizzing the landlords agent, it seems we've even been charged for work that I have done to a chimney.
Apparently this was an oversight on the...
Anyone know where I could source a pair ?
The swivelling inserts that are in the ends of the ram are badly worn, and could really do with replacing, but Kverneland don't stock them as a separate spare part.
They are roughly 20 mm internal diameter, 35 external, and 20 mm wide at the center.
This is my first crop of Agostino Triticale, and it has these plants that are considerably taller than the majority across the whole field.
Is this normal ?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.