Search results

I chip wood for my own boilers , as part of this I now have to send in samples for testing . My last sample "failed "apparently chip size was not g 30 but did clarify as g50 . Firstly I think looking at the pile of chip they are wrong in this, looks pretty small to me and it all passes through...

Having been successful in applying for grant for a few small items I tried to purchase item 207 P an air drill for establishing cover crops which was on the grant application listed at around £1990 with £796 to be awarded . I am unable to find anything approaching that price on the...

On our Fordson Dexta the lift arms will raise all the way up when applying small movement at quadrant , they then lock up in this position under pressure until pressure is released either by opening up the external service valve or flicking the draft control lever up and down a couple of times...

Looking to replace my Ford Dexta tachometer . There seem to be any number of new replacements but they are all different to mine in that 1 . Needle works in opposite direction to original . 2 . The PTO and Pulley speed settings are not the same , on original , PTO is shown as about...

Im looking at buying a PTO pressure washer . Ive narrowed it down to either 30l/min or 40/l /min gearbox driven . What are peoples experience of these machines and flow rates ?

Ive got a Redrock shear grab . The original tines lasted well but replacements from local dealer are given to bending or breaking . What are the best tines out there for strength ?

Ive got a redrock shear grab , the original tines lasted well , as I've come to replace them due to wear I've found the replacements from local dealer not as strong , given to bending and breaking . Im not sure what make the replacements are. What are the best tines out there for strength ?

Although not currently allowed under RHI , going forward when this subsidy expires I wondered how different boilers perform on burning Grain ? I know the Guntamatic will happily burn cereals , any one had experience of the ETA Hack in this role ?

What is the durability of larch as a fence post ? I know it has natural weather resistance as cladding etc but wondered how it survived in the ground ?

Iv e got the Herz 199kw biomass boiler , Im constantly getting melted lumps of silica like material and clinker on grate which goes on to block the ash removal auger . Also not producing much heat . Im burning good dry larch chip so is not poor fuel . Any suggestions as to what's going on...

What is peoples experience with makes of weigh bars and display for cattle crush ? I have a system at the moment that has become unreliable , seems sensitive to damp and moisture in the connectors I think , so not usable at the moment . The Bars themselves are of good quality , stainless...

Can anyone direct me to a supplier of the Perkins engine water level / temp sensor fitted to the MF 29 combine other than main dealer who seem to want ridiculous money for a new one ?

Can anyone suggest why when fitting or removing hydraulic hose quick couplers on grab I can't release any residual pressure in the system so end up slackening off pipe unions to let pressure go in order to fit or dissconnect ?

I find I need the air con on to demist the glass as soon as heater is on , full time on this machine , even when machine is fully warm and has been used for a while , as soon as the air con is turned off the windows start to mist up . Is this normal for these machines or is something else...

Iv e just changed the starter on Ford Dexta , the old one having become tired and was soaking up battery power to such an extent it was unusable . The brand new unit spins and starts the tractor really well but then continues to turn unless ignition switch is turned off . On further...

I have been quoted £ 780 to clean a 50 kw roof mounted array . the installation is 6 years old has has not been cleaned before . I have noticed a reduction in output over last year or so but how much of this is weather related I don't know . Is this price likely to be cost effective ?

Wondered if anyone has had an issue with the stoker auger on this model when using hardwood chip e.g. from hedge laying . Motor really seems to struggle with this material , though it is well within the G 30 spec . I have had the system switch off on numerous occasions with Motor Protection...

There doesn't appear to be any sight gauge to know how much hydraulic oil to put in when topping up , does anyone know how to judge this or there an indicator of some sort I am missing ?

Looking up the hydraulic oil flow for this model ( MF 240 ) I come across a figure of 18 l/min as well as 36 l/min elsewhere . 18 l/min is the same as the older 135 , I would be surprised if they hadn't uprated the pump when rolling out the later model . Can anyone enlighten me on this , I...

Ive got transmission fluid leak from this Power Shift Plus model , seems to be from top of box butI can't see right up under floor . Does anyone have experience of accessing this area on this machine and any likely cause of leak ?